Mitigating Corrosion in Downhole Environments of Oil and Gas Operations: Mechanisms, Challenges, and Control Strategies
DOI:
https://doi.org/10.48048/tis.2025.9855Keywords:
Corrosion, High temperature, Downhole environments, Corrosion control techniques, Dissolvable toolsAbstract
As oil and gas exploration and production extend into deeper and more challenging environments, the prevalence of acid gases in high-temperature, high-pressure conditions intensifies corrosion risks. This review examines corrosion mechanisms in downhole environments, focusing on the impact of CO2, H2S, and O2, as well as key forms of degradation, including pitting, crevice, under-deposit, stress corrosion cracking, and erosion-corrosion. Corrosion control strategies such as inhibitors, surface coatings, and material selection are analyzed, highlighting their effectiveness and limitations. Additionally, the role of advanced dissolvable tools in enhancing operational efficiency and reducing post-fracture cleanup, their controlled corrosion mechanism, and application case studies are discussed. Despite significant progress, gaps remain in understanding gas interactions, corrosion behavior in extreme conditions, and the long-term performance of mitigation strategies. Future research should focus on refining corrosion prediction models, optimizing material performance, and evaluating economic feasibility, development, and practical use of advanced technologies to ensure reliable and cost-effective downhole operations.
HIGHLIGHTS
- Comprehensive analysis of corrosive gases, exploring the distinct roles of CO2, H2S, and O2 in influencing corrosion mechanisms in downhole environments, with an emphasis on the impact of environmental factors on alloy corrosion.
- Detailed examination of pitting, crevice, under-deposit, stress corrosion cracking, and erosion-corrosion as they pertain to oilfield conditions.
- Corrosion control techniques and their effectiveness in mitigating corrosion through corrosion inhibition, surface coatings, and materials selection for managing corrosion in complex downhole scenarios
- Advanced dissolvable tools, a desired type of corrosion in downhole wells, demonstrating how they improve well efficiency by eliminating milling, reducing downtime, and lowering intervention costs. Additionally, discussing their corrosion mechanism, and economic benefits, as well as providing case studies.
- A summary of a wide range of corrosion data of different types of alloys under downhole settings.
- Suggested future research direction in eco-friendly inhibitors, smart coatings, optimized alloys, and AI-driven predictive model to enhance reliability, sustainability, and cost-effectiveness in downhole environments.
GRAPHICAL ABSTRACT
Downloads
References
PR Roberge. Handbook of corrosion engineering. 3rd ed. McGraw-Hill Education, New York, 2019.
JI Al-Tammar, M Bonis, HJ Choi and Y Al-Salim. Saudi Aramco downhole corrosion/scaling operational experience and challenges in HP/HT gas condensate producers. In: Proceedings of the SPE International Oilfield Corrosion Conference and Exhibition, Aberdeen, Scotland. 2014.
GH Koch, MPH Brongers, NG Thompson, YP Virmani and JH Payer. Corrosion cost and preventive strategies in the United States. National Technical Reports Library, United States, 2002.
MB Kermani and D Harrop. The impact of corrosion on the oil and gas industry. SPE Production & Facilities 1996; 11(03), 186-190.
PHMSA. Pipeline incident 20 year trends, Available at: https://www.phmsa.dot.gov/data-and-statistics/pipeline/pipeline-incident-20-year-trends, accessed February 2025.
Government of Canada. Pipeline incident data, Available at: https://open.canada.ca/data/en/ dataset/7dffedc4-23fa-440c-a36d-adf5a6 cc09f1/resource/cce956c1-556d-4fbb-bb24-20f46e1b39d0, accessed February 2025.
A Al-Saeed, R Chandra, N Ai-Mai, M Al-Awadi and Q Dashti. Corrosion monitoring, root cause analysis and selection criteria for future well completion design in deep HPHT sour wells. In: Proceedings of the Society of Petroleum Engineers - SPE International Conference and Exhibition on Oilfield Corrosion, Aberdeen, United Kingdom. 2012, p. 113-123.
R Case, S Mahajanam, J Dunn, M Joosten, M Achour, H Marchebois and M Bonis. High temperature corrosion studies in simulated SAGD produced fluids. Corrosion 2015; 71(4), 536-545.
RH Davis. The versatility of internal thermoplastic tubular liners in mitigating downhole corrosion and wear. In: Proceedings of the CORROSION 2003, NACE International, San Diego, California. 2003.
M Koteeswaran. 2010, CO2 and H2S corrosion in oil pipelines. Master’s Thesis, University of Stavanger, Norway, 2010.
LT Popoola, AS Grema, GK Latinwo, B Gutti and AS Balogun. Corrosion problems during oil and gas production and its mitigation. International Journal of Industrial Chemistry 2013; 4(1), 35.
S Howard and M Chrenowski. Corrosion in formate brines - 20 years of laboratory testing and field experience. In: Proceedings of the Offshore Technology Conference, Kuala Lumpur, Malaysia. 2014, p. 2572-2586.
MA Migahed and IF Nassar. Corrosion inhibition of tubing steel during acidization of oil and gas wells. Electrochim Acta 2008; 53(6), 2877-2882.
Y Wang, L Zhang, J Deng, Y Wang, S Ren and C Hu. An innovative air assisted cyclic steam stimulation technique for enhanced heavy oil recovery. Journal of Petroleum Science and Engineering 2017; 151, 254-263.
R Rihan, B Al-Wakaa, N Tanoli and H Shalaby. The susceptibility of P110 downhole tubular steel to sulfide stress cracking in H2S and NaCl. Journal of Petroleum Science and Engineering 2019; 174, 1034-1041.
U Lotz, LV Bodegom and C Ouwehand. The effect of type of oil or gas condensate on carbonic acid corrosion. Corrosion 1991; 47(8), 635-645.
S Ramachandran, A Gupta, G Al-Muntasheri, J Leal and I Syafil. Analysis of high temperature sour gas wells to mitigate corrosion and scale formation. In: Proceedings of the SPE Saudi Arabia Section Annual Technical Symposium and Exhibition, Al-Khobar, Saudi Arabia. 2015.
P Bai, H Zhao, S Zheng and C Chen. Initiation and developmental stages of steel corrosion in wet H2S environments. Corrosion Science 2015; 93, 109-119.
Q Wang, H Al-Ajwad, S Shen, Y Al-Salim, T Chen and J Leal. Sour corrosion products formed in high H2S gas wells. In: Proceedings of the CORROSION 2019, NACE International, Nashville, Tennessee, United States. 2019.
T Chen, Q Wang, F Chang, J Leal and M Espinosa. Root cause analysis for iron sulfide deposition in sour gas wells. In: Proceedings of the Society of Petroleum Engineers - SPE Kuwait Oil and Gas Show and Conference, Mishref, Kuwait. 2019.
S Standlee, KD Efird and D Spiller. Under deposit corrosion from iron sulfide. In: Proceedings of the Corrosion 2011, NACE International, Houston, Texas, United States. 2011.
LU Shuanlu, X Jianmin, Y Kang, C Zeliang and D Xunchang. Premium connection downhole tubing corrosion. Materials Performance 2008; 47(5), 66-69.
SR Jackson, B Gundemoni and P Barth. Sand control in corrosive and erosive downhole conditions at high temperatures. In: Proceedings of the Society of Petroleum Engineers - SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia. 2016.
DC His and RC Woollam. Field evaluation of downhole corrosion mitigation methods at Prudhoe Bay Field, Alaska. In: Proceedings of the SPE International Oilfield Chemistry Symposium Proceedings, Houston, Texas, United States. 2001.
T Chen, F Chang, F Liang and Q Wang. Evaluation of a newly developed coating material for corrosion protection using downhole corrosion and scale monitoring tool in sour gas wells. In: Proceedings of the CORROSION 1997, NACE International, Nashville, Tennessee, United States. 2019.
D Raghu and JBC Wu. Recent developments in wear and corrosion resistant alloys for oil industry. In: Proceedings of the CORROSION 1997, NACE International, New Orleans, Louisiana, United States. 1997.
W Badeghaish, M Noui-Mehidi and O Salazar. The future of nonmetallic composite materials in upstream applications. In: Proceedings of the Society of Petroleum Engineers - SPE Gas and Oil Technology Showcase and Conference 2019, Dubai, UAE. 2019.
E Ahmed, H Henein, A Qureshi and J Liu. The microstructure, mechanical behaviour, and dissolvability of novel Al-Cu-Zn-Mg-based alloys. Canadian Metallurgical Quarterly 2024; 63(2), 440-459.
VA Solovyeva, KH Almuhammadi and WO Badeghaish. Current downhole corrosion control solutions and trends in the oil and gas industry: A review. Materials 2023; 16(5), 1795.
DS Chauhan, MA Quraishi, AA Sorour and C Verma. A review on corrosion inhibitors for high-pressure supercritical CO2 environment: Challenges and opportunities. Journal of Petroleum Science and Engineering 2022; 215, 110695.
KK Selvan and RC Panda. Mathematical modeling, parametric estimation, and operational control for natural gas sweetening processes. ChemBioEng Reviews 2018; 5(1), 57-74.
S Cao, F He and J Gao. Corrosion problems in the oil country tubular goods and their mitigation - A review. Anti-Corrosion Methods and Materials 2017; 64(5), 465-478.
R Kiran, C Teodoriu, Y Dadmohammadi, R Nygaard, D Wood, M Mokhtari and S Salehi. Identification and evaluation of well integrity and causes of failure of well integrity barriers (a review). Journal of Natural Gas Science and Engineering 2017; 45, 511-526.
M Askari, M Aliofkhazraei, R Jafari, P Hamghalam and A Hajizadeh. Downhole corrosion inhibitors for oil and gas production - A review. Applied Surface Science Advances 2021; 6, 100128.
K Xhanari, Y Wang, Z Yang and M Finšgar. A review of recent advances in the inhibition of sweet corrosion. Chemical Record 2021; 21(7), 1845-1875.
MJ Goodwin, OM Musa and JW Steed. Problems associated with sour gas in the oilfield industry and their solutions. Energy and Fuels 2015; 29(8), 4667-4682.
RJ Johnson, BD Folwell, A Wirekoh, M Frenzel and L Skovhus. Reservoir souring - latest developments for application and mitigation. Journal of Biotechnology 2017; 256, 57-67.
M Elkhodbia, A Negi, G Mubarak, I Barsoum and A AlFantazi. Review on sulfide stress cracking in sour service for OCTG and recent advances in modeling of hydrogen-assisted fracture. Geoenergy Science and Engineering 2023; 230, 212174.
IB Obot, MM Solomon, SA Umoren, R Suleiman, M Elanany, NM Alanazi and AA Sorour. Progress in the development of sour corrosion inhibitors: Past, present, and future perspectives. Journal of Industrial and Engineering Chemistry 2019; 79, 1-18.
SB Paul. Investigation of sweet and sour corrosion of mild steel in oilfield environment by polarization, impedance, XRD and SEM studies. Corrosion Science and Technology 2018; 17(5), 249-256.
A Pfennig, M Wolf and A Kranzmann. Corrosion and corrosion fatigue of steels in downhole ccs environment - a summary. Processes 2021; 9(4), 594.
AM Nejad. A review of contributing parameters in corrosion of oil and gas wells. Anti-Corrosion Methods and Materials 2018; 65(1), 73-78.
IA Fioravante, RS Nunes, HA Acciari and EN Codaro. Films formed on carbon steel in sweet environments - a review. Journal of the Brazilian Chemical Society 2019; 30(7), 1341-1349.
IB Obot, IB Onyeachu, SA Umoren, MA Quraishi, AA Sorour, T Chen, N Aljeaban and Q Wang. High temperature sweet corrosion and inhibition in the oil and gas industry: Progress, challenges and future perspectives. Journal of Petroleum Science and Engineering 2020; 185, 106469.
G Mubarak, C Verma, I Barsoum, A Alfantazi and KY Rhee. Internal corrosion in oil and gas wells during casings and tubing: Challenges and opportunities of corrosion inhibitors. Journal of the Taiwan Institute of Chemical Engineers 2023; 150, 105027.
M Askari, M Aliofkhazraei and S Afroukhteh. A comprehensive review on internal corrosion and cracking of oil and gas pipelines. Journal of Natural Gas Science and Engineering 2019; 71, 102971.
P Gao and K Fan. Sulfur-oxidizing bacteria (SOB) and sulfate-reducing bacteria (SRB) in oil reservoir and biological control of SRB: A review. Archives of Microbiology 2023; 205(5), 162.
N Dopffel, S Jansen and J Gerritse. Microbial side effects of underground hydrogen storage - knowledge gaps, risks and opportunities for successful implementation. International Journal of Hydrogen Energy 2021; 46(12), 8594-8606.
XX Li, SM Mbadinga, JF Liu, L Zhou, SZ Yang, JD Gu and BZ Mu. Microbiota and their affiliation with physiochemical characteristics of different subsurface petroleum reservoirs. International Biodeterioration & Biodegradation 2017; 120, 170-185.
R Rabus, SS Venceslau, L Wöhlbrand, G Voordouw, JD Wall and IAC Pereira. A post-genomic view of the ecophysiology, catabolism and biotechnological relevance of sulphate-reducing prokaryotes. Advances in Microbial Physiology 2015; 66, 55-321.
BJ Little, DJ Blackwood, J Hinks, FM Lauro, E Marsili, A Okamoto, SA Rice, SA Wade and HC Flemming. Microbially influenced corrosion - any progress? Corrosion Science 2020; 170, 108641.
AK Tripathi, P Thakur, P Saxena, S Rauniyar, V Gopalakrishnan, RN Singh, V Gadhamshetty, EZ Gnimpieba, BK Jasthi and RK Sani. Gene sets and mechanisms of sulfate-reducing bacteria biofilm formation and quorum sensing with impact on corrosion. Frontiers in Microbiology 2021; 12, 754140.
MAA Khan, M Hussain and F Djavanroodi. Microbiologically influenced corrosion in oil and gas industries: A review. International Journal of Corrosion and Scale Inhibition 2021; 10(1), 80-106.
J Gaspar, J Mathieu, Y Yang, R Tomson, JD Leyris, KB Gregory and PJJ Alvarez. Microbial dynamics and control in shale gas production. Environmental Science & Technology Letters 2014; 1(12), 465-473.
B Anandkumar, RP George, S Maruthamuthu, N Parvathavarthini and UK Mudali. Corrosion characteristics of sulfate-reducing bacteria (SRB) and the role of molecular biology in SRB studies: An overview. Corrosion Reviews 2016; 34 (1-2), 41-63.
YS Choi, D Young, S Nešić and LGS Gray. Wellbore integrity and corrosion of carbon steel in CO2 geologic storage environments: A literature review. International Journal of Greenhouse Gas Control 2013; 16, S70-S77.
E Olorundaisi, T Jamiru and AT Adegbola. Mitigating the effect of corrosion and wear in the application of high strength low alloy steels (HSLA) in the petrochemical transportation industry - A review. Materials Research Express 2020; 6(12), 1265k9.
A Khan, A Qurashi, W Badeghaish, MN Noui-Mehidi and MA Aziz. Frontiers and challenges in electrochemical corrosion monitoring; surface and downhole applications. Sensors 2020; 20(22), 1-35.
M Shamlooh, S Abdelrady, M Buasali and K Farouque. Well integrity protection using corrosion inhibitor treatment system for sour gas producers in Bahrain field. In: Proceedings of the SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain. 2019.
P Kalita, V Sharma, L Pandey and P Tiwari. Secondary and tertiary oil recovery processes. In: L Pandey and P Tiwari (Eds.). Green energy and technology. Springer, Singapore, 2022 p. 23-50.
National Petroleum Council. CO2 enhanced oil recovery, Available at: https://webstore.iea.org/ insights-series-2015-storing-co2-, accessed February 2025.
S Anderson and R Newell. Prospects for carbon capture and storage technologies. Annual Review of Environment and Resources 2004; 29(1), 109-142.
RS Haszeldine. Carbon capture and storage: how green can black be? Science 2009; 325(5948), 1647-1652.
LS Melzer. Carbon dioxide enhanced oil recovery (CO2 EOR): Factors involved in adding carbon capture, utilization and storage (CCUS) to enhanced oil recovery. Center for Climate and Energy Solutions, Midland, Texas, United States, 2012.
FM Song. A comprehensive model for predicting CO2 corrosion rate in oil and gas production and transportation systems. Electrochimica Acta 2010; 55(3), 689-700.
Y Zhang, G Zhao and YF Cheng. Effect of O2 on down-hole corrosion during air-assisted steam injection for heavy oil recovery. Corrosion Engineering Science and Technology 2019; 54(4), 310-316.
JK Heuer and JF Stubbins. An XPS characterization of FeCO3 films from CO2 corrosion. Corrosion Science 1999; 41(7), 1231-1243.
PL Fosbøl, K Thomsen and EH Stenby. Review and recommended thermodynamic properties of FeCO3. Corrosion Engineering, Science and Technology 2010; 45(2), 115-135.
L Zheng, J Landon, NS Matin and K Liu. FeCO3 coating process toward the corrosion protection of carbon steel in a postcombustion CO2 capture system. Industrial & Engineering Chemistry Research 2016; 55(14), 3939-3948.
QY Li, LJ Mao and SW Zhou. Effects of chloride content on CO2 corrosion of carbon steel in simulated oil and gas well environments. Corrosion Science 2014; 84, 165-171.
R Elgaddafi, R Ahmed and S Osisanya. Modeling and experimental study on the effects of temperature on the corrosion of API carbon steel in CO2-saturated environment. Journal of Petroleum Science and Engineering 2021; 196, 107816.
R Barker, D Burkle, T Charpentier, H Thompson and A Neville. A review of iron carbonate (FeCO3) formation in the oil and gas industry. Corrosion Science 2018; 142, 312-341.
G Schmitt and M Horstemeier. Fundamental aspects of CO2 metal loss corrosion - part II: Influence of different parameters on CO2 corrosion mechanisms. In: Proceedings of the CORROSION 2006, NACE International, San Diego, California, United States, 2006.
K Patchigolla, JE Oakey and EJ Anthony. Understanding dense phase CO2 corrosion problems. Energy Procedia 2014; 63, 2493-2499.
M Ueda and H Takabe. Effect of environmental factor and microstructure on morphology of corrosion products in CO2 environments. In: Proceedings of the Corrosion 1999, NACE International, Houston, Texas, United States. 1999.
C Waard and DE Milliams. Carbonic acid corrosion of steel. Corrosion 1975; 31(5), 177-181.
K Videm and A Dugstad. Corrosion of carbon steel in an aqueous carbon dioxide environment. Materials Performance 1989; 28(4), 5890061.
YS Choi, S Nesic and HG Jung. Effect of alloying elements on the corrosion behavior of carbon steel in CO2 environments. In: Proceedings of the Corrosion 2018, NACE International, Phoenix, Arizona, United State. 2018.
E Gulbrandsen, J Kvarekval and H Miland. Effect of oxygen contamination on the inhibition of CO2 corrosion. In: Proceedings of the Corrosion 2001, Houston, Texas, United States. 2001.
S Dong, W Liu, J Zhang, X Lin, J He and M Lu. Effect of oxygen on CO2 corrosion and erosion-corrosion behavior of N80 steel under high temperature and high pressure. In: Proceedings of the Corrosion 2014, NACE International, San Antonio, Texas, United States. 2014.
S Wang. 2009, Effect of oxygen on CO2 corrosion of mild steel. Master’s Thesis. Ohio University, United States.
C de Waard, U Lotz and DE Milliams. Predictive model for CO2 corrosion engineering in wet natural gas pipelines. Corrosion 1991; 47(12), 976-985.
A Dugstad. Mechanism of protective film formation during CO2 corrosion of carbon steel. In: Proceedings of the CORROSION 98, NACE International, San Diego, California, United States.1998.
A Dugstad, B Morland and S Clausen. Corrosion of transport pipelines for CO2-effect of water ingress. Energy Procedia 2011; 4, 3063-3070.
CA Palacios and JR Shadley. CO2 corrosion of N-80 steel at 71 °C in a 2-phase flow system. Corrosion 1993; 49(8), 686-693.
S Nesic. Effects of multiphase flow on internal CO2 corrosion of mild steel pipelines. Energy and Fuels 2012; 26(7), 4098-4111.
AM Nor, MF Suhor, MF Mohamed, M Singer and S Nesic. Corrosion of carbon steel in high CO2 environment: Flow effect. In: Proceedings of the CORROSION 2011, NACE International, Houston, Texas, United States. 2011.
B Mishra, S Al-Hassan, DL Olson and MM Salama. Development of a predictive model for activation-controlled corrosion of steel in solutions containing carbon dioxide. Corrosion 1997; 53(11), 852-859.
ME Orazem and J Filho. Application of a submerged impinging jet to investigate the influence of temperature, dissolved CO2, and fluid velocity on corrosion of pipeline grade steel in brine. In: Proceedings of the CORROSION 2001, NACE International, Houston, Texas, United States. 2001.
U Lotz and T Sydberger. CO2 corrosion of carbon steel and 13Cr steel in particle-laden fluid. Corrosion 1988; 44(11), 800-809.
R Elgaddafi, R Ahmed, S Hassani, S Shah and SO Osisanya. Corrosion of C110 carbon steel in high-pressure aqueous environment with mixed hydrocarbon and CO2 gas. Journal of Petroleum Science and Engineering 2016; 146, 777-787.
ZR Ye, ZC Qiu, R Yi, PF Sui, XQ Lin and K Li. Effect of temperature on corrosion behaviour of N80 steel in CO2-saturated formation water. IOP Conference Series: Materials Science and Engineering 2019; 504(1), 012040.
Y Xiang, Z Wang, Z Li and WD Ni. Effect of temperature on corrosion behaviour of X70 steel in high pressure CO2/SO2/O2/H2O environments. Corrosion Engineering Science and Technology 2013; 48(2), 121-129.
HS Klapper, J Stevens and G Wiese. Pitting corrosion resistance of CrMn austenitic stainless steel in simulated drilling conditions-role of pH, temperature, and chloride concentration. Corrosion 2013; 69(11), 1095-1102.
M Xu, Q Zhang, XX Yang, Z Wang, J Liu and Z Li. Impact of surface roughness and humidity on X70 steel corrosion in supercritical CO2 mixture with SO2, H2O, and O2. The Journal of Supercritical Fluids 2016; 107, 286-297.
M Al-Khateeb, R Barker, A Neville and H Thompson. An experimental and theoretical investigation of the influence of surface roughness on corrosion in CO2 environments. Journal of Corrosion Science and Engineering 2018; 20, 1-29.
YS Choi and S Nešic. Effect of water content on the corrosion behavior of carbon steel in supercritical CO2 phase with impurities. In: Proceedings of the Corrosion 2011, NACE International, Houston, Texas, United States, 2011.
MF Mohamed, AM Nor, MF Suhor, M Singer, YS Choi and S Nešic. Water chemistry for corrosion prediction in high pressure CO2 environments. In: Proceedings of the Corrosion 2011, NACE International, Houston, Texas, United States. 2011.
Y Zhang, K Gao and G Schmitt. Effect of water on steel corrosion under supercritical CO2 conditions. Materials Performance 2011; 50(6), 62-68.
Y Zhang, K Gao and G Schmitt. Water effect on steel under supercritical CO2 condition. In: Proceedings of the Corrosion 2011, NACE International, Houston, Texas, United States. 2011.
YS Choi and S Nešić. Determining the corrosive potential of CO2 transport pipeline in high pCO2-water environments. International Journal of Greenhouse Gas Control 2011; 5(4), 788-797.
Y Xiang, Z Wang, X Yang, W Ni and Z Li. Corrosion behavior of X70 steel in the supercritical CO2 mixed with SO2 and saturated water. In: Proceedings of the 21st International Offshore and Polar Engineering Conference, Maui, Hawaii, United States. 2011.
J Wang, D Ryan, EJ Anthony, N Wildgust and T Aiken. Effects of impurities on CO2 transport, injection and storage. Energy Procedia 2011; 4, 3071-3078.
N Kladkaew, R Idem, P Tontiwachwuthikul and C Saiwan. Studies on corrosion and corrosion inhibitors for amine-based solvents for CO2 absorption from power plant flue gases containing CO2, O2 and SO2. Energy Procedia 2011; 4, 1761-1768.
Y Xiang, Z Wang, C Xu, C Zhou, Z Li and W Ni. Impact of SO2 concentration on the corrosion rate of X70 steel and iron in water-saturated supercritical CO2 mixed with SO2. The Journal of Supercritical Fluids 2011; 58(2), 286-294.
P Ahmadi and A Chapoy. CO2 solubility in formation water under sequestration conditions. Fluid Phase Equilibria 2018; 463 80-90.
EM Russick, GA Poulter, CLJ Adkins and NR Sorensen. Corrosive effects of supercritical carbon dioxide and cosolvents on metals. The Journal of Supercritical Fluids 1996; 9(1), 43-50.
A Al-Hashem and JA Carew. CO2 corrosion of L-80 steel in simulated oil well conditions. In: Proceedings of the CORROSION 2002, NACE International, Denver, Colorado, United States. 2002.
J Whittaker, Q Liu, DJ Brown and R Marsden. Corrosion management and mechanism study on SAGD Brackish water system. In: Proceedings of the Corrosion 2014, NACE International, San Antonio, Texas, United States. 2014.
R Elgaddafi, R Ahmed and S Shah. Modeling and experimental studies on CO2-H2S corrosion of API carbon steels under high-pressure. Journal of Petroleum Science and Engineering 2017; 156, 682-696.
S Trasatti, L Scoppio and T Cheldi. H2S and CO2 corrosion of some 9Cr1Mo alloys for downhole applications. In: Proceedings of the Corrosion 2001, NACE International, Houston, Texas, United States. 2001.
S Hassani, TN Vu, NR Rosli, SN Esmaeely, YS Choi, D Young and S Nesic. Wellbore integrity and corrosion of low alloy and stainless steels in high pressure CO2 geologic storage environments: An experimental study. International Journal of Greenhouse Gas Control 2014; 23, 30-43.
B Kermani, JC Gonzales, GL Turconi, TE Perez and C Morales. In-field corrosion performance of 3 %Cr steels in sweet and sour downhole production and water injection. In: Proceedings of the Corrosion 2004, NACE International, New Orleans, Louisiana, United States. 2004.
CF Chen, GX Zhao and ML Yan. Characteristics of CO2 corrosion product film in Cr oil casing steel. Journal of the Chinese Society of Corrosion and Protection 2002; 22, 335-338.
Z Yuling, T Qingchao, D Xuyan, X Xu and W Guofu. The CO2 corrosion behaviour of 25Mn2 and 2Cr steels under certain downhole condition. Corrosion Engineering, Science and Technology 2024; 59(1), 3-12.
C Ren, D Liu, Z Bai and T Li. Corrosion behavior of oil tube steel in simulant solution with hydrogen sulfide and carbon dioxide. Materials Chemistry and Physics 2005; 93(2-3), 305-309.
W Yan, J Deng, P Zhu and X Xing. Investigation of pH2S influence on 3 % Cr tubing steel corrosion behaviours in CO2-H2S-Cl- environment. Corrosion Engineering Science and Technology 2015; 50(7), 525-532.
M de Romero. The mechanism of SRB action in MIC, based on sulfide corrosion and iron sulfide corrosion products. In: Proceedings of the Corrosion 2005, NACE International, Houston, Texas, United States. 2005.
S Maxwell. Implications of re-injection of produced water on microbially influenced corrosion (MIC) in offshore water injection systems. In: Proceedings of the Corrosion 2005, NACE International, Houston, Texas, 2005.
M Nemati, GE Jenneman and G Voordouw. Mechanistic study of microbial control of hydrogen sulfide production in oil reservoirs. Biotechnology and Bioengineering 2001; 74(5), 424-434.
HA Videla and LK Herrera. Microbiologically influenced corrosion: Looking to the future. International Microbiology 2005; 8(3), 169-180.
Y Li, RA van Santen and T Weber. High-temperature FeS-FeS2 solid-state transitions: Reactions of solid mackinawite with gaseous H2S. Journal of Solid State Chemistry 2008; 181(11), 3151-3162.
J Tang, Y Shao, J Guo, T Zhang, G Meng and F Wang. The effect of H2S concentration on the corrosion behavior of carbon steel at 90 C. Corrosion Science 2010; 52(6), 2050-2058.
C Zhou, S Zheng, C Chen and G Lu. The effect of the partial pressure of H2S on the permeation of hydrogen in low carbon pipeline steel. Corrosion Science 2013; 67, 184-192.
P Bai, S Zheng, H Zhao, Y Ding, J Wu and C Chen. Investigations of the diverse corrosion products on steel in a hydrogen sulfide environment. Corrosion Science 2014; 87, 397-406.
H Ma, X Cheng, G Li, S Chen, Z Quan, S Zhao and L Niu. The influence of hydrogen sulfide on corrosion of iron under different conditions. Corrosion Science 2000; 42(10), 1669-1683.
T Pehlke. Studies of aqueous hydrogen sulfide corrosion in producing SAGD wells. In: Proceedings of the Society of Petroleum Engineers - SPE Thermal Well Integrity and Design Symposium, Alberta, Canada. 2017.
D Rickard. The solubility of FeS. Geochimica et Cosmochimica Acta 2006; 70(23), 5779-5789.
F Shi, L Zhang, J Yang, M Lu, J Ding and H Li. Polymorphous FeS corrosion products of pipeline steel under highly sour conditions. Corrosion Science 2016; 102, 103-113.
W Liu, Z Zhou, Z Li, M Li, Q Li, Z Ye, J Yao and X Zhong. The high-temperature mechanical properties of HS110S steel and its corrosion behaviors in harsh downhole environment. Anti-Corrosion Methods and Materials 2022; 69(5), 550-560.
YT Al-Janabi. An overview of corrosion in oil and gas industry. In: VS Saji and SA Umoren (Eds.). Corrosion inhibitors in the oil and gas industry. John Wiley & Sons, New Jersey, United States, 2020, p. 1-39.
AJ Betts and LH Boulton. Crevice corrosion: Review of mechanisms, modelling, and mitigation. British Corrosion Journal 1993; 28(4), 279-295.
SM Sharland. A review of the theoretical modelling of crevice and pitting corrosion. Corrosion Science 1987; 27(3), 289-323.
XQ Lin, W Liu, J Zhang, S Dong, HL Zhang, XB Li, CC Xu and MX Lu. Characteristics of corrosion scale of 3Cr steel at high temperature and pressure in an O2 and CO2 environment. Wuli Huaxue Xuebao/ Acta Physico - Chimica Sinica 2013; 29(11), 2405-2414.
J Zhang, X Lin, S Lu, T Wang, W Liu, S Dong, C Yang and M Lu. Corrosion behavior and mechanism of N80 steel under high temperature and high pressure CO2-O2 coexisting condition. In: Proceedings of the CORROSION 2013, NACE International, Orlando, Florida, United States. 2013.
B Yu, DY Li and A Grondin. Effects of the dissolved oxygen and slurry velocity on erosion-corrosion of carbon steel in aqueous slurries with carbon dioxide and silica sand. Wear 2013; 302(1-2), 1609-1614.
Y Zhang, G Zhao and YF Cheng. Downhole O2 corrosion during air-assisted steam injection for secondary or tertiary oil recovery. Corrosion Engineering Science and Technology 2020; 55(3), 189-195.
X Lin, W Liu, F Wu, C Xu, J Dou and M Lu. Effect of O2 on corrosion of 3Cr steel in high temperature and high pressure CO2-O2 environment. Applied Surface Science 2015; 329, 104-115.
M Zenghua, S Yongtao and L Haitao. Corrosion and protection of oil pipe steel P110 in multicomponent thermal fluid. Chemical Engineering of Oil & Gas 2012; 41(6), 583-585.
KV Rybalka, LA Beketaeva and AD Davydov. Determination of corrosion current density on bulk nickel and nickel powder by the rate of cathodic depolarizer consumption. Russian Journal of Electrochemistry 2016; 52(10), 921-924.
Y Hua, R Barker and A Neville. Understanding the influence of SO2 and O2 on the corrosion of carbon steel in water-saturated supercritical CO2. In: Proceedings of the CORROSION 2015, NACE International, Dallas, Texas, United States. 2015.
YS Choi, S Nesic and D Young. Effect of impurities on the corrosion behavior of CO2 transmission pipeline steel in supercritical CO2-water environments. Environmental Science & Technology 2010; 44(23), 9233-9238.
SP Sah, E Tada and A Nishikata. Corrosion behaviour of austenitic stainless steels in carbonate melt at 923 K under controlled CO2-O2 environment. Corrosion Science 2018; 133, 310-317.
L Xia, Y Li, L Ma, H Zhang, N Li and Z Jiang. Influence of O2 on the erosion-corrosion performance of 3Cr steels in CO2 containing environment. Materials 2020; 13(3), 791.
Y Hua, R Barker and A Neville. The effect of O2 content on the corrosion behaviour of X65 and 5Cr in water-containing supercritical CO2 environments. Applied Surface Science 2015; 356, 499-511.
H Mansoori, R Mirzaee, F Esmaeilzadeh, A Vojood and AS Dowrani. Pitting corrosion failure analysis of a wet gas pipeline. Engineering Failure Analysis 2017; 82, 16-25.
S Fajardo, DM Bastidas, M Criado and JM Bastidas. Electrochemical study on the corrosion behaviour of a new low-nickel stainless steel in carbonated alkaline solution in the presence of chlorides. Electrochimica Acta 2014; 129, 160-170.
L Freire, MJ Carmezim, MGS Ferreira and MF Montemor. The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides. Electrochimica Acta 2011; 56(14), 5280-5289.
L Cao, A Anderko, F Gui and N Sridhar. Localized corrosion of corrosion resistant alloys in H2S-containing environments. Corrosion 2016; 72(5), 636-654.
D Lasebikan, A Akisanya and B Deans. Effect of ammonium bisulphite and chloride on the pitting and stress corrosion cracking resistance of super duplex stainless steel pipes under combined internal pressure and axial tension. Materials and Corrosion 2019; 70(4), 661-675.
S Zheng, C Li, Y Qi, L Chen and C Chen. Mechanism of (Mg, Al, Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion. Corrosion Science 2013; 67, 20-31.
MI Abdulsalam. Behaviour of crevice corrosion in iron. Corrosion Science 2005; 47(6), 1336-1351.
B Cai, Y Liu, X Tian, F Wang, H Li and R Ji. An experimental study of crevice corrosion behaviour of 316L stainless steel in artificial seawater. Corrosion Science 2010; 52(10), 3235-3242.
S Nagarajan and N Rajendran. Crevice corrosion behaviour of superaustenitic stainless steels: Dynamic electrochemical impedance spectroscopy and atomic force microscopy studies. Corrosion Science 2009; 51(2), 217-224.
JW Oldfield and WH Sutton. Crevice corrosion of stainless steels: II. experimental studies. British Corrosion Journal 1978; 13(3), 104-111.
Q Yu, C Liu, X Pang, Q Liu and K Gao. CREVICE corrosion behaviors of Q235 weld joint. Acta Metallurgica Sinica 2014; 50(11), 1319-1326.
D Chen, EH Han and X Wu. Effects of crevice geometry on corrosion behavior of 304 stainless steel during crevice corrosion in high temperature pure water. Corrosion Science 2016; 111, 518-530.
EC Hornus and MA Rodr’guez. Effect of temperature on the crevice corrosion resistance of Ni-Cr-Mo alloys as engineered barriers of nuclear repositories. Procedia Materials Science 2012; 1, 251-258.
EB Haugan, M Næss, CT Rodriguez, R Johnsen and M Iannuzzi. Effect of tungsten on the pitting and crevice corrosion resistance of type 25Cr super duplex stainless steels. Corrosion 2017; 73(1), 53-67.
K Pourabdollah. Fouling formation and under deposit corrosion of boiler firetubes. Journal of Environmental Chemical Engineering 2021; 9(1), 104552.
G Yang, L Ying and L Haichao. Experimental studies on the local corrosion of low alloy steels in 3.5 % NaCl. Corrosion Science 2001; 43(3), 397-411.
AD Saad, MA Alghazal and MA Alkhowaildi. Prediction and management of scale and corrosion in a harsh operating environment: Challenges and innovative solutions. In: Proceedings of the Society of Petroleum Engineers - SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition, Dammam, Saudi Arabia. 2016.
A Daminov, V Ragulin and A Voloshin. Mechanism formations of corrosion damage of inter equipment in wells by continuous scale-inhibitor dosing utilizing surface dosing systems: Testing scale and corrosion inhibitors. In: Proceedings of the SPE International Oilfield Corrosion Symposium, Aberdeen, United Kingdom. 2006.
RH Hausler, RM Krishnamurthy and BWA Sherar. Observation of productivity loss in large oil wells due to scale formation without apparent production of formation brine. In: Proceedings of the CORROSION 2015, Dallas, Texas, United States. 2015.
T Chen, Q Wang, F Chang and A Mukhles. Iron sulfide deposition in sour gas wells: A corrosion induced scale problem. In: Proceedings of the Society of Petroleum Engineers - SPE International Oilfield Corrosion Conference and Exhibition 2018, Aberdeen, Scotland, United Kingdom. 2018.
Y Tan, Y Fwu and K Bhardwaj. Electrochemical evaluation of under-deposit corrosion and its inhibition using the wire beam electrode method. Corrosion Science 2011; 53(4), 1254-1261.
PT Jakobsen and E Maahn. Temperature and potential dependence of crevice corrosion of AISI 316 stainless steel. Corrosion Science 2001; 43(9), 1693-1709.
JR Vera, D Daniels and MH Achour. Under deposit corrosion (UDC) in the oil and gas industry: A review of mechanisms, testing and mitigation. In: Proceedings of the Corrosion 2012, NACE International, Utah, United States. 2012.
J Kvarekvål and G Svenningsen. Effect of iron sulfide deposits on sour corrosion of carbon steel. In: Proceedings of the Corrosion 2016, NACE International, Vancouver, Canada. 2016.
GA Zhang, N Yu, LY Yang and XP Guo. Galvanic corrosion behavior of deposit-covered and uncovered carbon steel. Corrosion Science 2014; 86, 202-212.
M Monnot, RP Nogueira, V Roche, G Berthomé, E Chauveau, R Estevez and M Mantel. Sulfide stress corrosion study of a super martensitic stainless steel in H2S sour environments: Metallic sulfides formation and hydrogen embrittlement. Applied Surface Science 2017; 394, 132-141.
M Al-Mansour, AM Alfantazi and M El-boujdaini. Sulfide stress cracking resistance of API-X100 high strength low alloy steel. Materials & Design 2009; 30(10), 4088-4094.
B Kermani, JW Martin and DF Waite. Hydrogen sulfide cracking of downhole tubulars. In: Proceedings of the Middle East Oil Show, Bahrain. 1991.
AA Fragiel, S Serna, J Malo-Tamayo, P Silva, B Campillo, E Martínez-Martínez, L Cota, MH Staia, ES Puchi-Cabrera and R Perez. Effect of microstructure and temperature on the stress corrosion cracking of 2 microalloyed pipeline steels in H2S environment for gas transport. Engineering Failure Analysis 2019; 105, 1055-1068.
PR Rhodes. Environment-assisted cracking of corrosion-resistant alloys in oil and gas production environments: A review. Corrosion 2001; 57(11), 923-966.
SMR Ziaei, J Mostowfi, MG Pour and SAR Ziaei. Failure analysis: Chloride stress corrosion cracking of AISI 316 stainless steel downhole pressure memory gauge cover. Engineering Failure Analysis 2013; 33, 465-472.
XW Lei, YR Feng, AQ Fu, JX Zhang, ZQ Bai, CX Yin and CH Lu. Investigation of stress corrosion cracking behavior of super 13Cr tubing by full-scale tubular goods corrosion test system. Engineering Failure Analysis 2015; 50, 62-70.
LH Blanche and RJK Wood. Erosion-corrosion synergism for multi-phase flowline materials. La Houille Blanche 1992; 47(7-8), 605-610.
EAM Hussain and MJ Robinson. Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles. Corrosion Science 2007; 49(4), 1737-1754.
Y Liu, A Alfantazi, RF Schaller and E Asselin. Localised instability of titanium during its erosion-corrosion in simulated acidic hydrometallurgical slurries. Corrosion Science 2020; 174, 108816.
BT Lu, JF Lu and JL Luo. Erosion-corrosion of carbon steel in simulated tailing slurries. Corrosion Science 2011; 53(3), 1000-1008.
M Rameshk, M Soltanieh and SM Masoudpanah. Effects of flow velocity and impact angle on erosion-corrosion of an API-5 L X65 steel coated by plasma nitriding of hard chromium underlayer. Journal of Materials Research and Technology 2020; 9(5), 10054-10061.
JZ Yi, HX Hu, ZB Wang and YG Zheng. On the critical flow velocity for erosion-corrosion in local eroded regions under liquid-solid jet impingement. Wear 2019; 422, 94-99.
ZB Zheng, YG Zheng, WH Sun and JQ Wang. Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution. Corrosion Science 2013; 76, 337-347.
ZB Zheng, YG Zheng, WH Sun and JQ Wang. Effect of applied potential on passivation and erosion-corrosion of a Fe-based amorphous metallic coating under slurry impingement. Corrosion Science 2014; 82, 115-124.
ZB Zheng, YG Zheng, X Zhou, SY He, WH Sun and JQ Wang. Determination of the critical flow velocities for erosion-corrosion of passive materials under impingement by NaCl solution containing sand. Corrosion Science 2014; 88, 187-196.
ZB Zheng and YG Zheng. Erosion-enhanced corrosion of stainless steel and carbon steel measured electrochemically under liquid and slurry impingement. Corrosion Science 2016; 102, 259-268.
JZ Yi, HX Hu, ZB Wang and YG Zheng. Comparison of critical flow velocity for erosion-corrosion of 6 stainless steels in 3.5 wt% NaCl solution containing 2 wt% silica sand particles. Wear 2018; 416, 62-71.
J Aguirre, M Walczak and M Rohwerder. The mechanism of erosion-corrosion of API X65 steel under turbulent slurry flow: Effect of nominal flow velocity and oxygen content. Wear 2019; 438, 203053.
EM Costa, BA Dedavid, CA Santos, NF Lopes, C Fraccaro, T Pagartanidis and LP Lovatto. Crevice corrosion on stainless steels in oil and gas industry: A review of techniques for evaluation, critical environmental factors and dissolved oxygen. Engineering Failure Analysis 2023; 144, 106955.
ZB Wang, L Pang and YG Zheng. A review on under-deposit corrosion of pipelines in oil and gas fields: Testing methods, corrosion mechanisms and mitigation strategies. Corrosion Communications 2022; 7, 70-81.
R Baboian, J Schully, N Sridhar, D Dunn, C Brossia, G Cragnolino and J Kearns. Chapter 19-crevice corrosion. In: R Baboian (Ed.). Corrosion tests and standards: Application and interpretation. ASTM International, West Conshohocken, United States, 2005, p. 221.
FO Pessu. 2015, Investigation of pitting corrosion of carbon steel in sweet and sour oilfield corrosion conditions: A parametric study. Ph. D. Dissertation. University of Leeds, United Kingdom.
NU Obeyesekere. Pitting corrosion. In: AM El-Sherik (Ed.). Trends in oil and gas corrosion research and technologies: Production and transmission. Woodhead Publishing, Sawston, United Kingdom, 2017, p. 215-248.
SA Shirazi, BS Mclaury, JR Shadley, KP Roberts, EF Rybicki, HE Rincon, S Hassani, FM Al-Mutahar and GH Al-Aithan. Erosion-corrosion in oil and gas pipelines. In: RW Revie (Ed.). Oil and gas pipelines: Integrity and safety handbook. Wiley, New Jersey, United States, 2015, p. 399-422.
VS Raja and T Shoji. Stress corrosion cracking: Theory and practice. Elsevier, Amsterdam, The Netherlands, 2011.
S Papavinasam, A Doiron and RW Revie. Model to predict internal pitting corrosion of oil and gas pipelines. Corrosion 2010; 66(3), 035006.
RL Martin, DW Stegmann and PA Sookprasong. Oilfield corrosion failures analysis: Lessons learned from pitting morphologies. In: Proceedings of the International Petroleum Technology Conference, Bangkok, Thailand. 2016.
X Jiang, Q Zhang, D Qu, K Xu and X Song. Corrosion behavior of L360 N and L415 N mild steel in a shale gas gathering environment - laboratory and on-site studies. Journal of Natural Gas Science and Engineering 2020; 82, 103492.
W Zhang, B Brown, D Young, G Bota, S Nesic and M Singer. Pitting mechanism of mild steel in marginally sour environments-part I: A parametric study based on formation of protective layers. Corrosion Science 2021; 183, 109305.
H Wang and J Wylde. Corrosion inhibitor development for slight sour environment with oxygen intrusion issue. In: Proceedings of the CORROSION 2010, NACE International, San Antonio, Texas, United States. 2010.
JJ Wan, W Ji, Y He, J Li and Y Gao. Pitting and strip corrosion influence on casing strength of salt cavern compressed air energy storage. Energies 2023; 16(14), 5362.
A Rahbar-Ranji, N Niamir and A Zarookian. Ultimate strength of stiffened plates with pitting corrosion. International Journal of Naval Architecture and Ocean Engineering 2015; 7(3), 509-525.
A Sidharth. Effect of pitting corrosion on ultimate strength and buckling strength of plates - a review. Digest Journal of Nanomaterials & Biostructures 2009; 4(4), 783-788.
Z Wang, P Wang, D Zeng, T Shi and W Deng. A study on the influential factors of stress corrosion cracking in C110 casing pipe. Materials 2022; 15(3), 801.
YN Zhang, SG Zhang, JH Luo, Y Long, N Ji, B Fan and SM Wang. Effect of flow rate on the corrosion behavior of P110 steel in high-Ca2+ and high-Cl− environment. Metals 2022, 12(7), 1183.
A Anderko and D Miller. Calculating pitting corrosion, Available at: https://wiki.olisystems.com/wiki/Calculating_
Pitting_Corrosion, accessed June 2024.
A Anderko, F Gui, L Cao and N Sridhar. Modeling localized corrosion of corrosion-resistant alloys in oil and gas production environments. In: Proceedings of the CORROSION 2014, NACE International, San Antonio, Texas, United States. 2014.
HS Klapper and J Stevens. Susceptibility to pitting corrosion of nickel-based alloy 718 exposed to simulated drilling environments. Corrosion 2014; 70(9), 899-906.
R Zhang, C Ruan, H Yin, D Li, H Liao and M Lu. Effect of chloride ion concentration on corrosion resistance of nickel-based alloy 718 in H2S and CO2 containing environment. Corrosion Science and Protection Technology 2018; 30(3), 285-290.
A Anderko, GR Engelhardt, F Gui, L Cao and N Sridhar. Localized corrosion of corrosion-resistant alloys in environments containing hydrogen sulfide. In: Proceedings of the CORROSION 2015, NACE International, Dallas, Texas, United States. 2015.
F Gui, L Cao, R Thodla and N Sridhar. Localized corrosion and stress corrosion cracking of UNS S32750 in H2S containing environment. In: Proceedings of the CORROSION 2016, NACE International, Vancouver, Canada, 2016.
L Pang, Z Wang, Y Zheng, X Lai and X Han. On the localised corrosion of carbon steel induced by the in-situ local damage of porous corrosion products. Journal of Materials Science & Technology 2020; 54, 95-104.
P Guo, EC La Plante, B Wang, X Chen, M Balonis, M Bauchy and G Sant. Direct observation of pitting corrosion evolutions on carbon steel surfaces at the nano-to-micro- scales. Scientific Reports 2018; 8(1), 1-12.
DA López, WH Schreiner, SR De Sánchez and SN Simison. The influence of carbon steel microstructure on corrosion layers: An XPS and SEM characterization. Applied Surface Science 2003; 207(1-4), 69-85.
F Xue, X Wei, J Dong, C Wang and W Ke. Effect of chloride ion on corrosion behavior of low carbon steel in 0.1 m NaHCO3 solution with different dissolved oxygen concentrations. Journal of Materials Science & Technology 2019; 35(4), 596-603.
M Liu, J Wang, W Ke and EH Han. Corrosion behavior of X52 anti-H2S pipeline steel exposed to high H2S concentration solutions at 90 °C. Journal of Materials Science & Technology 2014; 30(5), 504-510.
R Barker, D Burkle, T Charpentier, H Thompson and A Neville. A review of iron carbonate (FeCO3) formation in the oil and gas industry. Corrosion Science 2018; 142, 312-341.
A Shamsa, R Barker, Y Hua, E Barmatov, TL Hughes and A Neville. The role of Ca2+ ions on Ca/Fe carbonate products on X65 carbon steel in CO2 corrosion environments at 80 and 150 °C. Corrosion Science 2019; 156, 58-70.
KT Ly, DJ Blumer, WM Bohon and A Chan. Novel chemical dispersant for removal of organic/inorganic Schmoo scale in produced water injection systems. In: Proceedings of the CORROSION 1998, NACE International, San Diego, California, 1998.
J Beavers and TA Bubenik. Stress corrosion cracking. In: AM El-Sherik (Ed.). Woodhead publishing series in energy, trends in oil and gas corrosion research and technologies: Production and transmission. Woodhead Publishing, Sawston, United Kingdom, 2017, p. 295-314.
X Tang, LY Xu and YF Cheng. Electrochemical corrosion behavior of X-65 steel in the simulated oil-sand slurry. II: Synergism of erosion and corrosion. Corrosion Science 2008; 50(5), 1469-1474.
BR Tian and YF Cheng. Electrochemical corrosion behavior of X-65 steel in the simulated oil sand slurry. I: Effects of hydrodynamic condition. Corrosion Science 2008; 50(3), 773-779.
J Aguirre and M Walczak. Multifactorial study of erosion-corrosion wear of a X65 steel by slurry of simulated copper tailing. Tribology International 2018; 126, 177-185.
P Andrews, TF Illson and SJ Matthews. Erosion-corrosion studies on 13 Cr steel in gas well environments by liquid jet impingement. Wear 1999; 233, 568-574.
QY Wang, SL Bai and Z Liu. Surface characterization and erosion-corrosion behavior of Q235 steel in dynamic flow. Tribology Letters 2013, 53(1), 271-279.
MA Islam and Z Farhat. Erosion-corrosion mechanism and comparison of erosion-corrosion performance of API steels. Wear 2017; 376, 533-541.
RJK Wood. Erosion-corrosion mechanism and comparison effect on marine and offshore materials. Wear 2006; 261(9), 1012-1023.
RH Jones. Mechanisms of stress-corrosion cracking. In: RH Jones (Ed.). Stress-corrosion cracking. 2nd ed. ASM International, Almere, The Netherlands, 2017, p. 1-41.
LK Zhu, Y Yan, LJ Qiao and AA Volinsky. Stainless steel pitting and early-stage stress corrosion cracking under ultra-low elastic load. Corrosion Science 2013; 77, 360-368.
G van Boven, W Chen and R Rogge. The role of residual stress in neutral pH stress corrosion cracking of pipeline steels. part I: Pitting and cracking occurrence. Acta Materialia 2007; 55(1), 29-42.
AB Cook, SB Lyon, NPC Stevens, M Gunther, G McFiggans, RC Newman and DL Engelberg. Assessing the risk of under-deposit chloride-induced stress corrosion cracking in austenitic stainless steel nuclear waste containers. ECS Transactions 2014; 49(6), 529-534.
D Kuang and YF Cheng. Study of cathodic protection shielding under coating disbondment on pipelines. Corrosion Science 2015; 99, 249-257.
OE Albores-Silva, EA Charles and C Padovani. Effect of chloride deposition on stress corrosion cracking of 316L stainless steel used for intermediate level radioactive waste containers. Corrosion Engineering, Science and Technology 2011; 46(2), 124-128.
C Örnek and DL Engelberg. Toward understanding the effects of strain and chloride deposition density on atmospheric chloride-induced stress corrosion cracking of type 304 austenitic stainless steel under MgCl2 and FeCl3: MgCl2 droplets. Corrosion 2019; 75(2), 167-182.
AMPP. Oil and gas production, Available at: https://www.ampp.org/technical-research/what-is-corrosion/corrosion
n-reference-library/oil-gas, accessed July 2024.
VN Ayukayeva, GI Boiko, NP Lyubchenko, RG Sarmurzina, RF Mukhamedova, US Karabalin and SA Dergunov. Polyoxyethylene sorbitan trioleate surfactant as an effective corrosion inhibitor for carbon steel protection. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2019; 579, 123636.
Z Panossian, NL de Almeida, RMF de Sousa, G de Souza Pimenta and LBS Marques. Corrosion of carbon steel pipes and tanks by concentrated sulfuric acid: A review. Corrosion Science 2012; 58, 1-11.
D Wang, Y Li, B Chen and L Zhang. Novel surfactants as green corrosion inhibitors for mild steel in 15 % HCl: experimental and theoretical studies. Chemical Engineering Journal 2020; 402, 126219.
X Wang, H Yang and F Wang. A cationic gemini-surfactant as effective inhibitor for mild steel in HCl solutions. Corrosion Science 2010; 52(4), 1268-1276.
NAF Al-Rawashdeh and AK Maayta. Cationic surfactant as corrosion inhibitor for aluminum in acidic and basic solutions. Anti-Corrosion Methods and Materials 2005; 52(3), 160-166.
RD Tems. Downhole corrosion. In: AM El-Sherik (Ed.). Woodhead publishing series in energy, trends in oil and gas corrosion research and technologies: Production and transmission. Woodhead Publishing, New Jersey, United States, 2017, p. 79-94.
M Finšgar and J Jackson. Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review. Corrosion Science 2014; 86, 17-41.
NACE Task Group T-1D-34 Technical Committee Report. Laboratory test methods for evaluating oilfield corrosion inhibitors. NACE, Houston, Texas, United States, 1996.
NACE Task Group T-1D-8 Technical Committee Report. Wheel test method used for evaluation of film persistent inhibitors for oilfield applications. NACE, Houston, Texas, United States, 1982.
RR Hausler, DW Stegmann and RF Stevens. The methodology of corrosion inhibitor development for CO2 systems. Materials and Corrosion 1989; 40(2), 98-113.
BM Watson and J David. Oilfield corrosion inhibition under extremely high shear conditions. In: Proceedings of the CORROSION 2000, NACE International, Orlando, Florida, United States. 2000.
G Chesnut and HJ Choi. Laboratory testing and selection of corrosion inhibitors for continuous application in multiphase pipelines. In: Proceedings of the Corrosion 1994, NACE International, Houston, Texas, United States. 1994.
NACE Task Group T-5A-31 Technical Committee Report. State-of-the-art report on controlled-flow laboratory corrosion tests. NACE, Houston, Texas, United States, 1995.
CG Law and J Newman. Corrosion of a rotating iron disk in laminar, transition, and fully developed turbulent flow. Journal of the Electrochemical Society 1986; 133(1), 37-42.
G Liu, DA Tree and MS High. Relationships between rotating disk corrosion measurements and corrosion in pipe flow. Corrosion 1994; 50(8), 584-593.
K Denpo and H Ogawa. Fluid flow effects on CO2 corrosion resistance of oil well materials 8. Corrosion 1993; 49, 442-449.
JL Dawson and CC Shih. Inhibitor evaluations under controlled hydrodynamic shear. In: Proceedings of the Corrosion 2000, NACE International, Orlando, Florida, United States, 1991.
ASTM G170-06(2020)e1. Standard guide for evaluating qualifying oilfield and refinery corrosion inhibitors in the laboratory. ASTM International, West Conshohocken, United States, 2020.
JM Esteban, GS Hickey and ME Orazem. The impinging jet electrode: Measurement of the hydrodynamic constant and its use for evaluating film persistency. Corrosion 1990; 46(11), 896-901.
GA Schmitt and W Bruckhoff. Flow loop versus rotating probes - experimental results and service applications. Materials Performance 1991; 30(2), 85.
AA Farag and MR Noor El-Din. The adsorption and corrosion inhibition of some nonionic surfactants on API X65 steel surface in hydrochloric acid. Corrosion Science 2012; 64, 174-183.
CM Fernandes, LX Alvarez, NE dos Santos, ACM Barrios and EA Ponzio. Green synthesis of 1-benzyl-4-phenyl-1h-1,2,3-triazole, its application as corrosion inhibitor for mild steel in acidic medium and new approach of classical electrochemical analyses. Corrosion Science 2019; 149, 185-194.
MA Hegazy, AS El-Tabei, AH Bedair and MA Sadeq. An investigation of 3 novel nonionic surfactants as corrosion inhibitor for carbon steel in 0.5 m H2SO4. Corrosion Science 2012; 54(1), 219-230.
MA Migahed, AA Farag, SM Elsaed, R Kamal, M Mostfa and H Abd El-Bary. Synthesis of a new family of Schiff base nonionic surfactants and evaluation of their corrosion inhibition effect on X-65 type tubing steel in deep oil wells formation water. Materials Chemistry and Physics 2011; 125(1-2), 125-135.
K Ramji, DR Cairns and S Rajeswari. Synergistic inhibition effect of 2-mercaptobenzothiazole and tween-80 on the corrosion of brass in NaCl solution. Applied Surface Science 2008; 254(15), 4483-4493.
KF Khaled. New synthesized guanidine derivative as a green corrosion inhibitor for mild steel in acidic solutions. International Journal of Electrochemical Science 2008; 3(4), 462-475.
I Ahamad and MA Quraishi. Mebendazole: New and efficient corrosion inhibitor for mild steel in acid medium. Corrosion Science 2010; 52(2), 651-656.
M Hosseini, SFL Mertens and MR Arshadi. Synergism and antagonism in mild steel corrosion inhibition by sodium dodecylbenzenesulphonate and hexamethylenetetramine. Corrosion Science 2003; 45(7), 1473-1489.
LM Rivera-Grau, M Casales, I Regla, DM Ortega-Toledo, JA Ascencio-Gutierrez, J Porcayo-Calderon and L Martinez-Gomez. Effect of organic corrosion inhibitors on the corrosion performance of 1018 carbon steel in 3 % NaCl solution. International Journal of Electrochemical Science 2013; 8(2), 2491-2503.
JR Perumareddi, VS Sastri and PR Roberge. Selection of corrosion inhibitors based on structural features. In: RW Revie, VS Sastri, DL Piron and P Mayer (Eds.). Materials performance maintenance. Pergamon, İzmir, Turkey, 1991, p. 195-206.
T Zhou, J Yuan, Z Zhang, X Xin and G Xu. The comparison of imidazolium Gemini surfactant [C14-4-C14im]Br2 and its corresponding monomer as corrosion inhibitors for A3 carbon steel in hydrochloric acid solutions: Experimental and quantum chemical studies. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2019; 575, 57-65.
EF Moura, AOW Neto, TN de Castro Dantas, HS Júnior and A Gurgel. Applications of micelle and microemulsion systems containing aminated surfactants synthesized from ricinoleic acid as carbon-steel corrosion inhibitors. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2009; 340(1-3), 199-207.
M Faccini, L Bautista, L Soldi, AM Escobar, M Altavilla, M Calvet, A Domènech and E Domínguez. Environmentally friendly anticorrosive polymeric coatings. Applied Sciences 2021; 11(8), 3446.
S Yadav, APS Raman, MB Singh, I Massey, P Singh, C Verma and A AlFantazi. Green nanoparticles for advanced corrosion protection: Current perspectives and future prospects. Applied Surface Science Advances 2024; 21, 100605.
J Panchal, D Shah, R Patel, S Shah, M Prajapati and M Shah. Comprehensive review and critical data analysis on corrosion and emphasizing on green eco-friendly corrosion inhibitors for oil and gas industries. Journal of Bio-and Tribo-Corrosion 2021; 7(3), 1-29.
AA Nazeer and M Madkour. Potential use of smart coatings for corrosion protection of metals and alloys: A review. Journal of Molecular Liquids 2018; 253, 11-22.
RB Figueira, CJR Silva and EV Pereira. Organic-inorganic hybrid sol-gel coatings for metal corrosion protection: A review of recent progress. Journal of Coatings Technology and Research 2015; 12(1), 1-35.
H Lu, S Zhang, W Li, Y Cui and T Yang. Synthesis of graphene oxide-based sulfonated oligoanilines coatings for syneristically enhanced corrosion protection in 3.5 % NaCl solution. ACS Appl Mater Interfaces 2017; 9(4), 4034-4043.
B Ramezanzadeh, A Ahmadi and M Mahdavian. Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets. Corrosion Science 2016; 109, 182-205.
M Cui, J Pu, J Liang, L Wang, G Zhang and Q Xue. Corrosion and tribocorrosion performance of multilayer diamond-like carbon film in NaCl solution. RSC Advances 2015; 5(127), 104829-104840.
M Cui, J Pu, G Zhang, L Wang and Q Xue. The corrosion behaviors of multilayer diamond-like carbon coatings: Influence of deposition periods and corrosive medium. RSC Advances 2016; 6(34), 28570-28578.
A Ahmadi, B Ramezanzadeh and M Mahdavian. Hybrid silane coating reinforced with silanized graphene oxide nanosheets with improved corrosion protective performance. RSC Advances 2016; 6(59), 54102-54112.
B Ramezanzadeh, Z Haeri and M Ramezanzadeh. A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance. Chemical Engineering Journal 2016; 303, 511-528.
M Cui, S Ren, H Zhao, Q Xue and L Wang. Polydopamine coated graphene oxide for anticorrosive reinforcement of water-borne epoxy coating. Chemical Engineering Journal 2018; 335, 255-266.
NS Sangaj and VC Malshe. Permeability of polymers in protective organic coatings. Progress in Organic Coatings 2004; 50(1), 28-39.
Q Meng, T Ramgopal and GS Frankel. The influence of inhibitor ions on dissolution kinetics of Al and Mg using the artificial crevice technique. Electrochemical and Solid-State Letters 2002; 5(2), B1.
P Schmuki, S Virtanen, HS Isaacs, MP Ryan, AJ Davenport, H Böhm and T Stenberg. Electrochemical behavior of Cr2O3/Fe2O3 artificial passive films studied by in situ XANES. Journal of the Electrochemical Society 1998; 145(3), 791-801.
M Sakashita and N Sato. The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions. Corrosion Science 1977; 17(6), 473-486.
N Jadhav and V Gelling. Titanium dioxide/conducting polymers composite pigments for corrosion protection of cold rolled steel. Journal of Coatings Technology and Research 2015; 12(1), 137-152.
L Veleva. Protective coatings and inorganic anti-corrosion pigments. In: JV Koleske (Ed.). Paint and coating testing manual: 15th edition of the Gardner-Sward handbook. ASTM International, West Conshohocken, United States, 2012, p. 282.
AC Bastos, MG Ferreira and AM Simões. Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET. Corrosion Science 2006; 48(6), 1500-1512.
AM Atta, AM El-Saeed, HI Al-Shafey and GA El-Mahdy. Self-healing passivation of antimicrobial iron oxide nanoparticles for epoxy nanocomposite coatings on carbon steel. International Journal of Electrochemical Science 2016; 11(7), 5735-5752.
J Mu, F Gao, G Cui, S Wang, S Tang and Z Li. A comprehensive review of anticorrosive graphene-composite coatings. Progress in Organic Coatings 2021; 157, 106321.
JM Yeh, CL Chen, YC Chen, CY Ma, KR Lee, Y Wei and S Li. Enhancement of corrosion protection effect of poly(o-ethoxyaniline) via the formation of poly(o-ethoxyaniline)-clay nanocomposite materials. Polymer 2002; 43(9), 2729-2736.
T Wang, H Ge and K Zhang. A novel core-shell silica@graphene straticulate structured antistatic anticorrosion composite coating. Journal of Alloys and Compounds 2018; 745, 705-715.
N Jadhav, T Matsuda and V Gelling. Mica/polypyrrole (doped) composite containing coatings for the corrosion protection of cold rolled steel. Journal of Coatings Technology and Research 2018; 15(2), 363-374.
S Yang, J Huang, J Chen, JJ Noël, I Barker, JD Henderson, P He, H Zhang, H Zhang and J Zhu. A comparative study on the anti-corrosive performance of zinc phosphate in powder coatings. Coatings 2022; 12(2), 217.
RL Stout. Solvents in today’s coatings. In: C Craver and C Carraher (Eds.). Applied polymer science: 21st century. Elsevier Science, Oxford, United Kingdom, 2000, p. 527-543.
S Swarup and CK Schoff. A survey of surfactants in coatings technology. Progress in Organic Coatings 1993; 23(1), 1-22.
B Ramezanzadeh, E Raeisi and M Mahdavian. Studying various mixtures of 3-aminopropyltriethoxysilane (APS) and tetraethylorthosilicate (TEOS) silanes on the corrosion resistance of mild steel and adhesion properties of epoxy coating. International Journal of Adhesion and Adhesives 2015; 63, 166-176.
SS Golru, MM Attar and B Ramezanzadeh. Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating. Applied Surface Science 2015; 345, 360-368.
F Chen and P Liu. Conducting polyaniline nanoparticles and their dispersion for waterborne corrosion protection coatings. ACS Applied Materials & Interfaces 2011; 3(7), 2694-2702.
M Cui, S Ren, J Chen, S Liu, G Zhang, H Zhao, L Wang and Q Xue. Anticorrosive performance of waterborne epoxy coatings containing water-dispersible hexagonal boron nitride (h-BN) nanosheets. Applied Surface Science 2017; 397, 77-86.
L Ma, F Chen, Z Li, M Gan, J Yan, S Wei, Y Bai and J Zeng. Preparation and anticorrosion property of poly(2,3-dimethylaniline) modified by nano-SiO2. Composites Part B: Engineering 2014; 58, 54-58.
R Naderi and MM Attar. The role of zinc aluminum phosphate anticorrosive pigment in protective performance and cathodic disbondment of epoxy coating. Corrosion Science 2010; 52(4), 1291-1296.
AC Bastos, MGS Ferreira and AM Simões. Comparative electrochemical studies of zinc chromate and zinc phosphate as corrosion inhibitors for zinc. Progress in Organic Coatings 2005; 52(4), 339-350.
A Kalendová. Effects of particle sizes and shapes of zinc metal on the properties of anticorrosive coatings. Progress in Organic Coatings 2003; 46(4), 324-332.
M Alexandre and P Dubois. Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Materials Science and Engineering: R: Reports 2000; 28(1-2), 1-63.
M Behzadnasab, SM Mirabedini, K Kabiri and S Jamali. Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5 % NaCl solution. Corrosion Science 2011; 53(1), 89-98.
M Nematollahi, M Heidarian, M Peikari, SM Kassiriha, N Arianpouya and M Esmaeilpour. Comparison between the effect of nanoglass flake and montmorillonite organoclay on corrosion performance of epoxy coating. Corrosion Science 2010; 52(5), 1809-1817.
AK Lahiri. Material selection and performance in oil and gas industry. In: AK Lahiri (Ed.). Applied metallurgy and corrosion control. Springer, Singapore, 2017, p. 269-347.
S Bhat. Material selection for oilfield development - narration of practical experience. Corrosion 2017; 73, 1-11.
BE Urband and SMorey. High strength sour service C110 casing. In: Proceedings of the SPE/IADC Drilling Conference, Amsterdam, Netherlands. 1999.
IJ Rippon. Carbon steel pipeline corrosion engineering: Life cycle approach. In: Proceedings of the CORROSION 2001, NACE International, Houston, Texas, United States. 2001.
Published
Issue
Section
License
Copyright (c) 2025 Walailak University
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
