Enhancement of Mechanical and Wear Behavior of ABS/Teflon Composites
DOI:
https://doi.org/10.48048/tis.2022.3670Keywords:
ABS, Teflon, Tensile strength, Pin-on-disc, SEM, TaguchiAbstract
In the present investigations, Most of the engineering applications of metallic materials are replaced by polymeric based composite materials. Because of the low cost and accessible handling of polymer composite materials such as Acrylonitrile butadiene styrene (ABS) matrix materials are used to make the composites with additions of filler enhance the properties of the matrix materials. In the present study, ABS matrix material is used to make the composite materials by adding the Teflon materials. Investigations are carried out to find the enhancement of the composites' mechanical properties. Optimizing the process parameters is done to identify the composite's most optimum used to get composite with better mechanical properties. SEM analysis and wear Debris are investigated to study the microscopic surface nature and behavior of the composites.
Downloads
References
References
LW Chun, MQ Zhang,MZ Rong andKFriedrich.Tensile performance improvement of low nanoparticle-filled-polypropylene composites. Compos. Sci. Technol. 2002; 62, 1327-40.
MGarcía-Curiel, MD Rooij,L Winnubst, WEVanZyl andHVerweij.Friction and wear studies on nylon-6/SiO2 nanocomposites.J. Appl. Polym. Sci. 2004; 92, 1855-62.
DW Gebretsadik, JHardell and BPrakash.Friction and wear characteristics of PA 66 polymer composite/316L stainless steel tribopair in aqueous solution with different salt levels.Tribol. Int. 2020; 141, 105917.
NHameed, PA Sreekumar, SP Thomas and J Parameswaranpillai.Mechanical properties of poly (styrene-co-acrylonitrile)-modified epoxy resin/glass fiber composites.J. Appl. Polym. Sci. 2008; 110, 3431-8.
VL Rajaaand AKumaravel.Studies on physical and mechanical properties of silica fume-filled nylon 66 polymer composites for mechanical components.Polym. Polym. Compos.2015; 23, 427-33.
GRusu and ERusu. Nylon 6/TiO2 composites by in situ anionic ring-opening polymerization of ϵ-caprolactam: Synthesis, characterization, and properties.Int. J. Polym. Anal. Charact. 2011; 16, 561-83.
A Selmy, MA Abd El-baky and DA Hegazy.Wear behavior of glass-polyamide reinforced epoxy hybrid composites. J. Thermoplast. Compos. Mater. 2018; 33, 214-35.
KS Kumar and AC Reddy.Experimental investigation on mechanical and tribological properties of Mgo/ABS polymer composites.Int. J. Mech. Prod. Eng. Res. Dev. 2020; 10, 449-58.
KPanneerselvam, TRaghavendra1, S Mohanand AAhmad.Study on camphor soot reinforced polyamide-6 & ABS blend.ISME J. Manuf. Sci. 2018;7, 27-37.
KS Kumar and AC Reddy.Mechanical and wear behavior of ABS/BN polymer composites. Int. J. Eng. Sci. Technol. 2018; 10, 172-80.
N Vitchuli, Q Shi, J Nowak, K Kay, JM Caldwell, F Breidt, M Bourham, M McCord and X Zhang.Multifunctional ZnO/Nylon 6 nanofiber mats by electrospinning-electrospraying hybrid process for use in protective applications.Sci. Technol. Adv. Mater. 2016; 12, 1-7.
BM Rudresh,BN Ravikumar and D Madhu. Hybrid effect of micro fillers on the mechanical behavior of polyamide66/polytetrafluoroethylene blend.Ind. J. Adv. Chem. Sci. 2016; 4, 77-84.
AC Reddy.Characterization of mechanical behavior of nylon/teflon nano particulate composites.Int.J. Adv. Res. 2015; 3, 1241-6.
K Agarwal, N Akhil, R Srinivas and AC Reddy.Enhancement in mechanical behavior of nylon/teflon composites by addition of nano iron oxide (γ-Fe2O3).Int. J. Sci. Res. 2015;4, 927-32.
SR Karnati, P Agbo and L Zhang.Applications of silica nanoparticles in glass/carbon fiber-reinforced epoxy nanocomposite.Compos. Commun. 2020; 17, 32-41.
M Leonardi, M Alemani, G Straffelini and S Gialanellaa.A pin-on-disc study on the dry sliding behavior of a Cu-free friction material containing different natural graphite types. Wear 2020; 442-443, 203157.
AC Reddy.Characterization of mechanical and tribological behavior of (nylon 6 + graphite + teflon) nano particulate composite: Application perspective.Int. J. Sci. Eng. Res. 2015; 6, 378-86.
X Li, Y Gao, S Wei and Q Yang.Tribological behaviors of B 4 C-hBN ceramic composites used as pins or discs coupled with B 4 C ceramic under dry sliding condition.Ceram. Int. 2017; 43, 1578-83.
W Chen, Z Wang, X Liu, J Jiaand Y Hua. Effect of load on the friction and wear characteristics of Si3N4-hBN ceramic composites sliding against PEEK in artificial seawater.Tribol. Int. 2020; 141, 105902.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
