Corrosion Behavior of Low Carbon Steel Pipe in Condensate Environment

Authors

  • Ahmad Royani Research Center for Metallurgy and Materials, National Research and Innovation Agency, Puspiptek 470, South Tangerang, Banten, Indonesia
  • Siska Prifiharni Research Center for Metallurgy and Materials, National Research and Innovation Agency, Puspiptek 470, South Tangerang, Banten, Indonesia
  • Gadang Priyotomo Research Center for Metallurgy and Materials, National Research and Innovation Agency, Puspiptek 470, South Tangerang, Banten, Indonesia
  • Sundjono Research Center for Metallurgy and Materials, National Research and Innovation Agency, Puspiptek 470, South Tangerang, Banten, Indonesia

DOI:

https://doi.org/10.48048/tis.2022.2072

Keywords:

Condensate, Corrosion, Immersion, Steel pipe, Weight loss

Abstract

Low carbon steel pipe is widely used in various pipeline applications because it has good mechanical properties. The application of low carbon steel developed generally does not involve corrosion resistance. To find out the behavior of low carbon steel pipe in condensate fluids, the immersion test was carried out. The method for the immersion test is the planned-interval test. The corrosion rate of this steel was determined by weight loss, whereas the corrosivity of the condensate fluids was measured by a multimeter Hach HQ40d. The morphology of corrosion products is characterized by using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and x-ray diffraction (XRD). The result of immersion of low carbon steel pipe in the condensate fluids shows that the liquid corrosivity and corrodibility of low carbon steel pipe tend to decreases with the length of exposure time. The decrease of metal corrodibility is identical to the lower corrosion rate at a longer exposure time due to the layer a corrosion product formed. The corrosion products during immersion tests are uniform with iron oxide in the form of FeO(OH) and Fe2O3.H2O.

GRAPHICAL ABSTRACT

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

AK Sinha. Aspects of failure of condenser tubes and their remedial measures at power plants. AKS J. 2010; 1, 1-20.

YM Al Rawahi, F Shaik and LN Rao. Studies on scale deposition in oil industries & their control. Int. J. Innov. Res. Sci. Tech. 2017; 3, 152-67.

FD Owa. Water pollution: Sources, effects, control and management. Mediterr. J. Soc. Sci. 2013; 4, 65-8.

PR Roberge. Corrosion engineering: Principles and practice. McGraw Hill, New York, 2008.

JF Kreider. Environmental engineering. In: DY Goswami (Ed.). The CRC handbook of mechanical engineering. 2nd ed. CRC Press, New York, 2005, p. 161-7.

S Prifiharni, A Royani, J Triwardono, G Priyotomo and Sundjono. Corrosion rate of low carbon steel in simulated feed water for heat exchanger in ammonia plant. AIP Conf. Proc. 2020; 2232, 020007.

W Zhao, T Zhang, Y Wang, J Qiao and Z Wang. Corrosion failure mechanism of associated gas transmission pipeline. Materials (Basel) 2018; 11, 1935.

Y Chen, L Zhang, H Qin, L Xu and M Lu. Effects of temperature on CO2 top of line corrosion of pipeline steel. Corrosion 2011, Houston, Texas, 2011.

H Li, A Shi, M Li and X Zhang. Effect of pH, temperature, dissolved oxygen, and flow rate of overlying water on heavy metals release from storm sewer sediments. J. Chem. 2013; 2013, 434012.

ER Alley. Water quality control handbook. 2nd ed. McGraw Hill, New York, 2007.

ASTM International. Standard practice for laboratory immersion corrosion testing of metals. ASTM International, Pennsylvania, 1985, p. 534-44.

ASTM International. Standard practice for preparing , cleaning , and evaluating corrosion test. ASTM International, Pennsylvania, 1999.

A Royani, S Prifiharni, L Nuraini, G Priyotomo, Sundjono, I Purawiardi and H Gunawan. Corrosion of carbon steel after exposure in the river of Sukabumi, West Java. IOP Conf. Ser. Mater. Sci. Eng. 2019; 541, 012031.

MG Fontana. Corrosion engineering. 3rd ed. McGraw Hill, Singapore, 1987.

D Dwivedi, K Lepková and T Becker. Carbon steel corrosion: A review of key surface properties and characterization methods. RSC Adv. 2017; 7, 4580-610.

SD Cramer and BS Covino. ASM handbook vol. 13c: Corrosion: Environments and industries. ASM International, Ohio, 2006.

A Šalić and B Zelić. Introduction to environmental engineering. Phys. Sci. Rev. 2018; 3, 1-10.

RW Revie and HH Uhlig. Corrosion and corrosion control: An introduction to corrosion science and engineering. 4th ed. John Wiley & Sons, New Jersey, 2008.

Y Qi, H Luo, S Zheng, C Chen, Z Lv and M Xiong. Effect of temperature on the corrosion behavior of carbon steel in hydrogen sulphide environments. Int. J. Electrochem. Sci. 2014; 9, 2101-12.

JL Wang, XM Zhan, YC Feng and Y Qian. Effect of salinity variations on the performance of activated sludge system. Biomed. Environ. Sci. 2005; 18, 5-8.

N Sridhar. Effects of water and gas compositions on the internal corrosion of gas pipelines-modeling and experimental studies. Corrosion 2001; 57, 221-35.

S Wang, D Liu, N Du, Q Zhao, S Liu and J Xiao. Relationship between dissolved oxygen and corrosion characterization of X80 steel in acidic soil simulated solution. Int. J. Electrochem. Sci. 2014; 10, 4393-404.

BR Linter and GT Burstein. Reactions of pipeline steels in carbon dioxide solutions. Corrosion Sci. 1999; 41, 117-39.

A Royani, L Nuraini, S Prifiharni and G Priyotomo. Corrosion rate of various carbon steels in raw water for water cooling system at ammonia plant. Int. J. Eng. Trends Tech. 2018; 59, 51-8.

Q Cui, S Chandra and S McCahan. The effect of dissolving gases or solids in water droplets boiling on a hot surface. J. Heat Transfer 2001; 123, 719-28.

A Sander, B Berghult, AE Broo, EL Johansson and T Hedberg. Iron corrosion in drinking water distribution systems - the effect of pH, calcium and hydrogen carbonate. Corrosion Sci. 1996; 38, 443-55.

A Royani, S Prifiharni, G Priyotomo and Sundjono. Corrodibility of low carbon steel in immersion test using cooling water synthesis. Int. J. Mechatronics Appl. Mech. 2020; 2, 158-64.

A Royani, S Prifiharni, G Priyotomo, J Triwardono and Sundjono. Corrosion of carbon steel in synthetic freshwater for water distribution systems. IOP Conf. Ser. Earth Environ. Sci. 2019; 399, 012089.

N Tavanpour, M Noshadi and N Tavanpour. scale formation and corrosion of drinking water pipes: A case study of drinking water distribution system of Shiraz City. Mod. Appl. Sci. 2016; 10, 166-77.

C Miranda-Herrera, I Sauceda, J González-Sánchez and N Acuña. Corrosion degradation of pipeline carbon steels subjected to geothermal plant conditions. Anti-Corrosion Meth. Mater. 2010; 57, 167-72.

Downloads

Published

2022-01-17

How to Cite

Royani, A. ., Prifiharni, S. ., Priyotomo, G. ., & Sundjono, S. (2022). Corrosion Behavior of Low Carbon Steel Pipe in Condensate Environment. Trends in Sciences, 19(3), 2072. https://doi.org/10.48048/tis.2022.2072