Corrosion Behaviour of Aluminium Metal Matrix Composites (AMMCs) in Marine/Seawater Environments: A Review
DOI:
https://doi.org/10.48048/tis.2026.14922Keywords:
Electrochemical behaviour, Salt-spray testing, Sea water exposure, Aluminium matrix composites, Ceramic reinforcement, Marine environmentAbstract
Aluminium Metal Matrix Composites (AMMCs) are becoming popular materials for marine, aerospace, and offshore structures. This is because they are known to be strong for their weight, have better tribological performance, and are thermally stable. Despite these properties, corrosion problems still hinder their long-term effectiveness in marine environments. This review describes the corrosion of AMMCs in seawater, under exposure to salt spray, and during various electrochemical tests. Also, the review examines how different types of ceramic reinforcements (SiC, Al2O3, B4C), their volume fraction, the ways and manner of production, and the properties of the interfaces between the matrix and the reinforcement affect corrosion mechanisms. Galvanic interactions, microstructural heterogeneities, and how defects in the manufacturing process can speed up degradation are given close review. This also discusses the limitations of current testing methods.
HIGHLIGHTS
- Corrosion behaviour of AMMCs in marine/seawater environments was examined
- Performance of singly and hybrid reinforced composites in a marine environment was discussed.
- Strategies for the enhancement of AMMCs corrosion resistance were highlighted
GRAPHICAL ABSTRACT
Downloads
References
H Zhang, B Zhang, Q Gao, J Song and G Han. A review on microstructures and properties of graphene-reinforced aluminum matrix composites fabricated by friction stir processing. Journal of Manufacturing Processes 2021; 68(PB), 126-135.
R Chandel, N Sharma and SA Bansal. A review on recent developments of aluminum-based hybrid composites for automotive applications. Emerging Materials Research 2021; 4, 1243-1257.
A Mussatto, IU Ahad, RT Mousavian, Y Delaure and D Brabazon. Advanced production routes for metal matrix composites. Engineering Reports 2021; 3(5), e12330.
NMS Kumar. Effect on wear property of aluminium metal matrix composite reinforced with different solid lubricants: A review. International Journal of System Assurance Engineering and Management 2023; 14(S4), 909-917.
SN Tekale and DR Dolas. Study of fabrication methods and various reinforcements with aluminium for automotive application - A review. Materials Today: Proceedings 2022; 62, 2768-2773.
M SenthilKumar, RV Mangalaraja, R Senthil Kumar and L Natrayan. Processing and characterization of AA2024/Al2O3/SiC reinforced hybrid composites using squeeze casting technique. Iranian Journal of Materials Science and Engineering 2019; 16(2), 55-67.
RK Arya, R Kumar, A Telang and AS Yadav. Effect of microstructure on mechanical behaviors of Al6061 metal matrix composite reinforced with silicon nitride (Si3N4) and silicon carbide (SiC) micro particles. Silicon 2023; 15, 5911-5923.
G Kumaresan and BA Kumar. Investigations on mechanical and wear properties of Al matrix composites reinforced with hybrid SiC and Al2O3 micro-particles. International Journal of Metalcasting 2023; 17, 980-987.
M Vishnoi, S Srivastava, S Rai and N Verma. Experimental investigations of AA6061/Al2O3/WC/SiC hybrid metal matrix composite fabricated by 2 step stir casting. Advances in Materials and Processing Technologies 2024; 10(3), 2374-2396.
AA Emiru, DK Sinha, A Kumar and A Yadav. Fabrication and characterization of hybrid aluminium (Al6061) metal matrix composite reinforced with SiC, B4C and MoS2 via stir casting. International Journal of Metalcasting 2023; 17, 801-812.
T Senthilnathan and K Balachandar. Mechanical and microstructure evaluation of novel hybrid TiB2/B4C aluminium metal matrix composite. Materials Research Express 2023; 10, 066509.
M Hadian, H Shahrajabian and M Rafiei. Mechanical properties and microstructure of Al/(TiC+TiB2) composite fabricated by spark plasma sintering. Ceramics International 2019; 45(9), 12088-12092.
PV Reddy, PR Prasad, DM Krishnudu and EV Goud. An investigation on mechanical and wear characteristics of Al 6063/TiC metal matrix composites using RSM. Journal of Bio-and Tribo-Corrosion 2019; 5, 1-10.
M Chinababu, E Bhaskar Rao and K Sivaprasad. Fabrication, microstructure, and mechanical properties of Al-based metal matrix-TiB2-HEA hybrid composite. Journal of Alloys and Compounds 2023; 947, 169700.
GM Kumar. Characterization of Al6063/TiB2/Gr hybrid composite fabricated by stir casting process. Metal Powder Report 2021; 76, S30-S38.
C Parswajinan, BV Ramnath, S Abishek, B Niharishsagar and G Sridhar. Hardness and impact behaviour of aluminium metal matrix composite. IOP Conference Series: Materials Science and Engineering 2018; 390, 012075.
SMTI Nayim, MZ Hasan, PP Seth, P Gupta, S Thakur, D Kumar and A Jamwal. Effect of CNT and TiC hybrid reinforcement on the micro-mechano-tribo behaviour of aluminium matrix composites. Materials Today: Proceedings 2020; 21, 1421-1424.
EI Awode, S Amankwah, NI Mbada and IMB Omiogbemi. Simulating lightning effects on carbon fiber composite shielded with carbon nanotube sheets using numerical methods. Heliyon 2024; 10(8), e29762.
S Chand and P Chandrasekhar. Influence of B4C/BN on solid particle erosion of Al6061 metal matrix hybrid composites fabricated through powder metallurgy. Ceramics International 2020; 46(11), 17621-17630.
N Ramadoss, K Pazhanivel, A Ganeshkumar and M Arivanandhan. Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites. International Journal of Metalcasting 2023; 17, 499-514.
J Fayomi, API Popoola, OP Oladijo, OM Popoola and OSI Fayomi. Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites. Journal of Alloys and Compounds 2019; 790, 610-615.
KK Alaneme, JO Ekperusi and SR Oke. Corrosion behaviour of thermal cycled aluminium hybrid composites reinforced with rice husk ash and silicon carbide. Journal of King Saud University - Engineering Sciences 2018; 30(4), 378-385.
CU Atuanya, AOA Ibhadode and IM Dagwa. Effects of breadfruit seed hull ash on the microstructures and properties of Al-Si-Fe alloy/breadfruit seed hull ash particulate composites. Results in Physics 2012; 2, 142-149.
PP Ikubanni, M Oki, AA Adeleke, OS Adesina, PO Omoniyi and ET Akinlabi. Electrochemical studies of the corrosion behavior of Al/SiC/PKSA hybrid composites in 3.5% NaCl solution. Journal of Composites Science 2022; 6(10), 286.
EWA Fanani, E Surojo, AR Prabowo and HI Akbar. Recent progress in hybrid aluminum composite: Manufacturing and application. Metals 2021; 11(12), 1919.
VS Aigbodion. Bean pod ash nanoparticles a promising reinforcement for aluminium matrix biocomposites. Journal of Materials Research and Technology 2019; 8(6), 6011-6020.
VS Aigbodion and IC Ezema. Multifunctional A356 alloy/PKSAnp composites: Microstructure and mechanical properties. Defense Technology 2020; 16(3), 731-736.
KK Alaneme, CA Oganbule and A Adewale. Circumferential notch test based fracture toughness investigation of Al-Mg-Si alloy composites reinforced with alumina and quarry dust. Journal of Chemical Technology and Metallurgy 2020; 55(2), 469-478.
US Ikele, KK Alaneme and A Oyetunji. Mechanical behaviour of stir cast aluminum matrix composites reinforced with silicon carbide and palm kernel shell ash. Manufacturing Review 2022; 9, 1-13.
PK Swamy, S Mylaraiah, MPG Chandrashekarappa, A Lakshmikanthan, DY Pimenov, K Giasin and M Krishna. Corrosion behaviour of high-strength Al 7005 alloy and its composites reinforced with industrial waste-based fly ash and glass fibre: Comparison of stir cast and extrusion conditions. Materials 2021; 14(14), 3929.
J Fayomi, API Popoola, OP Oladijo, OM Popoola and OSI Fayomi. Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites. Journal of Alloys and Compounds 2019; 790, 610-615.
MK Sahu and RK Sahu. Fabrication of aluminum matrix composites by stir casting technique and stirring process parameters optimization. In: TR Vijayaram (Ed.). Advanced casting technologies. IntechOpen, London, 2018, p. 111-126.
H Singh and H Bhowmick. Lubricated tribology of lightweight MMCs: Recent and future perspectives of AMMCs. In: S Anil Bansal, V Khanna and P Gupta (Eds.). Metal matrix composites. CRC Press, Boca Raton, 2022, p. 233-274.
J Lade, KA Mohammed, D Singh, RP Verma, P Math, M Saraswat and LR Gupta. A critical review of fabrication routes and their effects on mechanical properties of AMMCs. Materials Today: Proceedings 2023. https://doi.org/10.1016/j.matpr.2023.03.041
AA Adeleke, PP Ikubanni, JK Odusote, BB Olujimi and JA Okolie. Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix composite. The International Journal of Advanced Manufacturing Technology 2023; 127(5-6), 2523-2536.
IMB Omiogbemi, EI Awode, MH Muhammad, A Adesanmi and IM Dagwa. Smart composite materials for aerospace applications. In: S Kunar, P Charkha, S Jaju and H Tiwari (Eds.). Smart composite materials for aerospace applications. Wiley, New Jersey, 2025.
PP Ikubanni, AA Adeleke, M Oki and H Singh. Sustainable hybrid metal matrix composites production and characterization. In: SRK Sandhu, S Singh, R Kumar and JP Davim (Eds.). Sustainable manufacturing: An emergence in industry 4.0. Taylor & Francis, Oxfordshire, 2024.
RT Loto and P Babalola. Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations. Cogent Engineering 2017; 4(1), 1422229.
PP Ikubanni, AA Adeleke, JK Odusote, TB Asafa, SK Kolawole, VO Ogbesanya and JA Okolie. Inhibition potential of silver-gold nanoparticles on mild steel in 3.5% NaCl solution. Engineering and Applied Science Research 2023; 50(5), 413-419.
IMB Omiogbemi, DS Yawas, A Das, MO Afolayan, ET Dauda, R Kumar, SR Gorja and SG Chowdhury. Mechanical properties and corrosion behaviour of duplex stainless steel weldment using novel electrodes. Scientific Reports 2022; 12(1), 22405.
DT Oloruntoba, OS Adesina, OO Sanyaolu, PP Ikubanni, BO Iwarere and AA Adediran. Development of aluminium base anode for cathodic protection of steel. Chemistry Africa 2024; 7(7), 4075-4088.
HM Zakaria. Microstructural and corrosion behavior of Al/SiC metal matrix composites. Ain Shams Engineering Journal 2014; 5, 831-838.
M Sambathkumar, KSK Sasikumar, R Gukendran, K Dineshkumar, K Ponappa and S Harichandran. Investigation of mechanical and corrosion properties of Al 7075/Redmud metal matrix composite. Revista de Metalurgia 2021; 57(1), e188.
YL Cheng, ZH Chen, HL Wu and HM Wang. The corrosion behaviour of the aluminium alloy 7075/SiCp metal matrix composite prepared by spray deposition. Materials and Corrosion 2007; 58(4), 280-284.
J Hemanth and MR Divya. Fabrication and corrosion behaviour of aluminium alloy (LM-13) reinforced with nano-ZrO2 particulate chilled nano metal matrix composites (CNMMCs) for aerospace applications. Journal of Minerals and Materials Characterization and Engineering 2018; 6, 136-150.
J Abuthakir, R Subramanian, M Kavitha, G Venkatesh, KK Kumar and P Manikandan. Corrosion studies of Alx-Ni in-situ intermetallics reinforced Al metal matrix composites. Materials Today: Proceedings 2020; 28, 1158-1163.
S Sarapure, BP Shivakumar and MB Hanamantraygouda. Investigation of corrosion behavior of SiC-reinforced Al 6061/SiC metal matrix composites using Taguchi Technique. Journal of Bio-and Tribo-Corrosion 2020; 6, 31.
R Mishra, E Singh, A Kumar, AK Singh, S Madhav, SK Shukla and S Kumar. Metal pollution in marine environment: Sources and impact assessment. In: SK Shukla, S Kumar, S Madhav and PK Mishra (Eds.). Metals in water: Global sources, significance, and treatment. Elsevier, Netherlands, 2022, p. 175-193.
Y Wu, W Zhao and L Wang. State of the art and current trends on the metal corrosion and protection strategies in deep sea. Journal of Materials Science & Technology 2025; 215, 192-213.
M Yazdi, F Khan, R Abbassi, N Quddus and HC Lopez. A review of risk-based decision-making models for microbiologically influenced corrosion (MIC) in offshore pipelines. Reliability Engineering & System Safety 2022; 223, 108474.
J Telegdi, A Shaban and L Trif. Review on the microbiologically influenced corrosion and the function of biofilms. International Journal of Corrosion and Scale Inhibition 2020; 9(1), 1-33.
Z Hu, H Yin, M Li, J Li and H Zhu. Research and developments of ceramic-reinforced steel matrix composites - A comprehensive review. The International Journal of Advanced Manufacturing Technology 2024; 131(1), 125-149.
Y Karabulut and R Unal. Additive manufacturing of ceramic particle-reinforced aluminum-based metal matrix composites: A review. Journal of Materials Science 2022; 57(41), 19212-19242.
S Focardi and M Pepi. Coastal monitoring and coastal erosion: Engineering interventions for coastal protection and considerations on the Mediterranean Sea, Available at https://doi.org/10.20944/preprints202310.1233.v1, accessed June 2026.
AFA Fuhaid and A Niaz. Carbonation and corrosion problems in reinforced concrete structures. Buildings 2022; 12(5), 586.
B Cherry and W Green. Corrosion and protection of reinforced concrete. 1st ed. CRC Press, London, 2021.
L Yadav, A Sihmar, S Kumar, H Dhaiya and R Vishwakarma. Review of nano based smart coatings for corrosion mitigation: Mechanisms, performance, and future prospects. Environmental Science and Pollution Research 2025; 32, 17032-17058.
F Aydin. A review of recent developments in the corrosion performance of aluminium matrix composites. Journal of Alloys and Compounds 2023; 949, 169508.
J Bienias, M Walczak, B Surowska and J Sobczak. Microstructure and corrosion behaviour of aluminum fly ash composites. Journal of Optoelectronics and Advanced Materials 2003; 5(2), 493-502.
WX Wang, Y Takao, T Matsubara, C Uchimura, S Baba and M Higashijima. Development of galvanic corrosion-resistant CFML based on composite coating. Journal of the Society of Materials Science 2007; 56(5), 420-425.
B Bobić, S Mitrović, M Babić and I Bobić. Corrosion of metal-matrix composites with aluminium alloy substrate. Tribology in Industry 2010; 32(1), 3-11.
PP Ikubanni, M Oki, AA Adeleke, AS Onaolapo and P Paramasivam. Electrochemical investigation of the corrosion susceptibility of hybrid reinforced Al6063 with SiC and PKSA in 1.0 M sulfuric acid environment. Engineering Reports 2024; 6(3), e12733.
YM Han and XG Chen. Electrochemical behavior of Al-B4C metal matrix composites in NaCl solution. Materials 2015; 8(9), 6455-6470.
N Murugan, KS Jayakumar, RA Raj and DA Prabu. Enhanced mechanical and tribological properties of ultrasonically assisted stir-cast AA7075 metal matrix composites in challenging corrosive environments. Materials Research Express 2024; 11(8), 086502.
R Escalera-Lozano, CA Gutiérrez, MA Pech-Canul and MI Pech-Canul. Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum. Materials Characterization 2007; 58, 953-960.
A Parveen, NR Chauhan and M Suhaib. Fabrication and corrosion behaviour of aluminium metal matrix composites - A review. IOP Conference Series: Materials Science and Engineering 2020; 923, 012056.
M Almomani, AM Hassan, T Qasim and A Ghaithan. Effect of process parameters on corrosion rate of friction stir welded aluminium SiC-Gr hybrid composites. Corrosion Engineering, Science and Technology 2013; 48(5), 346-353.
SK Mohammad. Corrosion behaviour of Al-12Si-1Mg automotive alloy in acidic, alkaline and salt media containing Zr traces. Journal of Chemical Technology and Metallurgy 2019; 54(2), 423-430.
D Nayak, S Rao, SL Gaonkar and PP Kumari. Hybrid metal matrix composite: A comprehensive review on its fabrication, corrosion behaviour and inhibition. Discover Applied Sciences 2025; 7, 791.
B Wielage, A Dorner, C Shurer and JH Kim. Corrosion protection of carbon fibre reinforced aluminium composite by diamondlike carbon coatings. Materials Science and Technology 2000; 16(3), 344-348.
A Kumar, VP Singh, RC Singh, R Chaudhary, D Kumar and AHI Mourad. A review of aluminum metal matrix composites: Fabrication route, reinforcements, microstructural, mechanical, and corrosion properties. Journal of Materials Science 2024; 59(7), 2644-2711.
S Harkiah, N Rauf and D Tahir. Review of ceramic materials and recent development of preparation methods. Gravitasi 2022; 21(2), 49-60.
X Xiang. Powder metallurgy composites. In: K Xu (Ed.). The ECPH Encyclopedia of mining and metallurgy. Springer Nature, Singapore, 2024, p. 1639-1640.
R Parvizi. 2022, Electrochemical and interfacial characterisation of localised corrosion at heterogeneous structures in AA2024. Ph. D. Dissertation. Deakin University, Australia, 2022.
RE Melchers, R Jeffrey, IA Chaves and RB Petersen. Predicting corrosion for life estimation of ocean and coastal steel infrastructure. Materials and Corrosion 2025; 76(6), 776-789.
J Korzekwa. Modification of the structure and properties of oxide layers on aluminium alloys: A review. Reviews on Advanced Materials Science 2023; 62(1), 20230108.
SL Lawal, SA Afolalu, TC Jen and ET Akinlabi. Corrosion control and its application in marine environment - A review. Solid State Phenomena 2024; 355, 61-73.
Y Gau, Y Zhou, W Wang, L Tian, J Zhao and J Sun. Synergistic damage mechanisms of high-temperature metal corrosion in marine environments: A review. Progress in Organic Coatings 2024; 197, 108765.
K Rahmani, GH Majzoobi, H Bakhtiari and A Sadooghi. On the effect of compaction velocity, size, and content of reinforcing particles on corrosion resistance of Mg-B4C composites. Materials Chemistry and Physics 2021; 271, 124946.
T Liu, W Lyu, Z Li, S Wang, X Wang, J Jiang and X Jiang. Recent progress on corrosion mechanisms of graphene-reinforced metal matrix composites. Nanotechnology Reviews 2023; 12(1), 20220566.
S Yan, GL Song, Z Li, H Wang, D Zheng, F Cao and L Zhou. A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments. Journal of Materials Science & Technology 2018; 34(3), 421-435.
AM Bell, MVD Au, J Regnery, M Schmid, B Meermann, G Reifferscheid and S Buchinger. Does galvanic cathodic protection by aluminum anodes impact marine organisms? Environmental Sciences Europe 2020; 32, 117.
SM Hussnain, SZH Shah, PSM Megat-Yusoff and MZ Hussain. Degradation and mechanical performance of fibre-reinforced polymer composites under marine environments: A review of recent advancements. Polymer Degradation and Stability 2023; 215, 110452.
Y Cao, J Bao, P Zhang, Y Sun and Y Cui. A state-of-the-art review on the durability of seawater coral aggregate concrete exposed to marine environment. Journal of Building Engineering 2022; 60, 105199.
M Zhang, S Sun, K Liu, T Li and H Yang. Research on the critical chloride content of reinforcement corrosion in marine concrete - A review. Journal of Building Engineering 2023; 79, 107838.
N Devi, A Wagner, J Lopez, A Guerini, D Zampini and AFR Loria. Mechanistic insights into electrodeposition in seawater at variable electrochemical potentials. Advanced Sustainable Systems 2024; 8(4), 2300446.
PV Krupakara and HR Ravikumar. Corrosion characterization of aluminium 6061/red mud metal matrix composites in sea water. International Journal of Advanced Research in Chemical Science 2015; 2(6), 52-55.
JK Odusote, AA Adeleke, SA Muraina, PP Ikubanni and IMB Omiogbemi. Magnesium inclusion effect on Al-Zn-Cu alloys: A study on microstructure and mechanical properties. Materials Today: Proceedings 2021; 46(12), 5914-5921.
Y Wang and T Monetta. Systematic study of preparation technology, microstructure characteristics and mechanical behaviors for SiC particle-reinforced metal matrix composites. Journal of Materials Research and Technology 2023; 25, 7470-7497.
K Kauranen. Corrosion protection improvement validation with the use of salt spray testing. Available at: https://urn.fi/URN:NBN:fi:amk-2024060420991, accessed June 2024.
SK Dhawan, H Bhandari, G Ruhi, BMS Bisht and P Sambyal. Corrosion preventive materials and corrosion testing. 1st ed. CRC Press, Boca Raton, 2020.
IMB Omiogbemi, DS Yawas, A Das, MO Afolayan, ET Dauda, R Kumar and SG Chowdhury. Effect of electrode configuration on the mechanical corrosion characteristics of welded AISI 2205 steel structure. MRS Advances 2023; 8, 499-507.
S Papavinasam. Electrochemical polarization techniques for corrosion monitoring. In: L Yang (Ed.). Techniques for corrosion monitoring. Woodhead Publishing, Cambridge, England, 2008, p. 49-85.
DH Xia, CM Deng, D Macdonald, S Jamali, D Mills, JL Luo, MG Strebl, M Amiri, W Jin, S Song and W Hu. Electrochemical measurements used for assessment of corrosion and protection of metallic materials in the field: A critical review. Journal of Materials Science & Technology 2022; 112, 151-183.
N Ikani, JH Pu and K Cooke. Analytical modelling and electrochemical impedance spectroscopy (EIS) to evaluate influence of corrosion product on solution resistance. Powder Technology 2024; 433, 119252.
HH Hernández, AMR Reynoso, JCT González, COG Morán, JGM Hernández, AM Ruiz, JM Hernández and RO Cruz. Electrochemical impedance spectroscopy (EIS): A review study of basic aspects of the corrosion mechanism applied to steels. In: M El-Azazy, M Min and P Annus (Eds.). Electrochemical impedance spectroscopy. IntechOpen, London, 2020.
S Martinez, I Šoić and V Špada. Unified equivalent circuit of dielectric permittivity and porous coating formalisms for EIS probing of thick industrial grade coatings. Progress in Organic Coatings 2021; 153, 106155.
Y De-Abreu, A Ferrer, G Rana and S Kung. Cyclic polarization and electrochemical impedance techniques to rapidly screen and assess pitting tendencies of corrosion inhibitor actives in carbon steel. In: Proceedings of the AMPP Annual Conference, Denver. 2023.
R Aslam. Potentiodynamic polarization methods for corrosion measurement. In: J Aslam, C Verma and CM Hussain (Eds.). Electrochemical and analytical techniques for sustainable corrosion monitoring. Elsevier, Netherlands, 2023, p. 25-37.
HS Magar, RY Hassan and A Mulchandani. Electrochemical impedance spectroscopy (EIS): Principles, construction, and biosensing applications. Sensors 2021; 21(19), 6578.
M Stefanoni, U Angst and B Elsener. Local electrochemistry of reinforcement steel - Distribution of open circuit and pitting potentials on steels with different surface condition. Corrosion Science 2015; 98, 610-618.
J Chen, J Liu, H Wang, B Li, Q Hu, T Shao, R Yang, B Wang, Q Wan, Z Li, Y Lei, G Zhang and B Yang. Experimental study on neutral salt spray accelerated corrosion of metal protective coatings for power-transmission and transformation equipment. Coatings 2023; 13(3), 480.
SK Sheetal, T Sanjeeve, AK Singh, M Singh, B Pani and VS Saji. A review of electrochemical techniques for corrosion monitoring - Fundamentals and research updates. Critical Reviews in Analytical Chemistry 2025; 55(1), 161-186.
AI Ikeuba, CN Njoku, OO Ekerenam, DI Njoku, II Udoh, EF Daniel, PC Uzoma, IN Etim and BO Okonkwo. A review of the electrochemical and galvanic corrosion behavior of important intermetallic compounds in the context of aluminum alloys. RSC Advances 2024; 14(43), 31921-31953.
D Wang, J Huang, C Tan, W Ma, Y Zou and Y Yang. Mechanical and corrosion properties of additively manufactured SiC-reinforced stainless steel. Materials Science and Engineering: A 2022; 841, 143018.
MM Sadawy, SM Fayed, M Tayea and IG El-Batanony. Microstructure, corrosion and electrochemical properties of Cu/SiC composites in 3.5 wt.% NaCl solution. Metals and Materials International 2024; 30(3), 568-584.
MK Aravindan and K Balamurugan. Tribological and corrosion behaviour of Al 6063/SiC metal matrix composites. International Journal of Advanced Engineering Technology 2016; 7, 2-7.
SSC Kollabathini, SP Dora and S Chintada. Corrosion behaviour of advanced composites containing surface modified SiC as reinforcement. Journal of Alloys and Compounds 2025; 1010, 177423.
W Aperador, J Aperador and G Orozco-Hernández. Comparative analysis of the corrosion and mechanical behavior of an Al-SiC composite and AA 2024 alloy fabricated by powder metallurgy for aeronautical applications. Metals 2024; 14(12), 1462.
Y Du, M Sun, N Sun, D Ma, B Pan, Z Wang, Q Li and C Wu. Effect of Al content on chemical corrosion resistance of Al/SiC composites. Ceramics International 2023; 49(22), 36928-36934.
SM Mahdi and L Ghalib. Corrosion behavior of Al/SiC composite prepared by powder metallurgy in chloride environments. Journal of Bio-and Tribo-Corrosion 2022; 8, 64.
KR Ramkumar, I Dinaharan, N Murugan and HS Kim. Development of aluminum matrix composites through accumulative roll bonding: A review. Journal of Materials Science 2024; 59(20), 8606-8649.
MK Aravindan, E Vinothkumar and M Prahadeeswaran. Investigation on corrosion behaviour of metal oxide nanoparticle-reinforced magnesium composites by salt spray and immersion corrosion test methods. Advances in Materials and Processing Technologies 2024; 11(4), 1958-1982.
VV Shanbhag, NN Yalamoori, S Karthikeyan, R Ramanujam and K Venkatesan. Fabrication, surface morphology and corrosion investigation of Al 7075-Al₂O₃ matrix composite in sea water and industrial environment. Procedia Engineering 2014; 97, 607-613.
KK Alaneme and MO Bodunrin. Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites. Journal of Minerals and Materials Characterization and Engineering 2011; 10(12), 1153-1165.
Y Gaylan, B Avar, M Panigrahi, B Aygün and A Karabulut. Effect of the B₄C content on microstructure, microhardness, corrosion, and neutron shielding properties of Al–B₄C composites. Ceramics International 2023; 49, 5479-5488.
SK Prasad, S Dayanand, M Rajesh, M Nagaral, V Auradi and R Selvaraj. Preparation and mechanical characterization of TiC particle-reinforced Al7075 alloy composites. Advances in Materials Science and Engineering 2022; 2022, 7105189.
AV Polunin, AO Cheretaeva, ED Borgardt, IA Rastegaev, MM Krishtal, AV Katsman and IS Yasnikov. Improvement of oxide layers formed by plasma electrolytic oxidation on cast AlSi alloy by incorporating TiC nanoparticles. Surface and Coatings Technology 2021; 423, 127603.
J Li, X Wang, M Cheng and X Ma. Progress in the preparation method and mechanical properties of TiC particle-reinforced steel matrix composites. Materials Today Communications 2025; 42, 111311.
V Sivananth, P Karuppusamy and K Lingadurai. Wear and corrosion behaviour of titanium carbide reinforced metal matrix composites for automobile brake disc application. International Journal of Materials Engineering Innovation 2019; 10(3), 246-267.
HC Ananda-Murthy and SK Singh. Influence of TiC particulate reinforcement on the corrosion behaviour of Al 6061 metal matrix composites. Advanced Materials Letters 2015; 6(7), 633-640.
S Kumar, A Kumar and C Vanitha. Corrosion behaviour of Al 7075/TiC composites processed through friction stir processing. Materials Today: Proceedings 2019; 15, 21-29.
SR Oke, N Maledi, IA Okanlawon, TR Bishi and OE Falodun. Tensile and corrosion properties of copper and alumina hybrid reinforcement on aluminum matrix composite. Journal of Composite Materials 2025; 59(13), 1595-1607.
QD Wu, XM Meng, JJ Guan, Q Liu, P Liang and Y Wang. Investigation on the microstructure and electrochemical corrosion properties of TiB₂ reinforced aluminum matrix composites. International Journal of Electrochemical Science 2022; 17(6), 220640.
GSP Kumar, R Keshavamurthy, P Kumari and C Dubey. Corrosion behaviour of TiB₂ reinforced aluminium based in situ metal matrix composites. Perspectives in Sciences 2016; 8, 172-175.
A Kumar, RC Singh and R Chaudhary. Recent progress in production of metal matrix composites by stir casting process: An overview. Materials Today: Proceedings 2020; 21, 1453-1457.
ZY Zhang, G Chen, SL Zhang, YT Zhao, R Yang and MP Liu. Enhanced strength and ductility in ZrB₂/2024Al nanocomposite with a quasi-network architecture. Journal of Alloys and Compound 2019; 778, 833-838.
IG Akande, OSI Fayomi, OO Oluwole and OO Ajide. Development of Zn–ZrB₂ nanocomposite coatings for wear, corrosion resistance and microstructure enhancement of carbon steel in saline environment. Chemical Papers 2022; 76(9), 5839-5852.
P Morampudi, VSNV Ramana, K Bhavani, C Kishore and KSR Vikas. Wear and corrosion behavior of AA6061 metal matrix composites with ilmenite as reinforcement. Materials Today: Proceedings 2022; 52(P3), 1515-1520.
S Dinesh Kumar, M Ravichandran, A Jeevika, B Stalin, C Kailasanathan and A Karthick. Effect of ZrB₂ on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route. Ceramics International 2021; 47(9), 12951-12962.
KK Alaneme, TM Adewale and PA Olubambi. Corrosion and wear behaviour of Al–Mg–Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide. Journal of Materials Research and Technology 2014; 3(1), 9-16.
AH Karabacak, A Çanakçı, F Erdemir, S Özkaya and M Çelebi. Corrosion and mechanical properties of novel AA2024 matrix hybrid nanocomposites reinforced with B₄C and SiC particles. Silicon 2022; 14, 8567-8579.
M Sambathkumar, R Gukendran and M Vijayanand. Investigation of corrosion behaviour of Al 7075/B₄C/Al₂O₃ hybrid metal matrix composite. Materials Today: Proceedings 2022; 50, 1606-1610.
RT Loto and P Babalola. Evaluation of the influence of alumina nano-particle size and weight composition on the corrosion resistance of monolithic AA1070 aluminium. Materials Today: Proceedings 2022; 65, 2138-2143.
S Narayanan, GG Sozhamannan, K Hemalatha and VSK Venkatachalapathy. Study on pitting corrosion behaviour of graphene oxide reinforced metal matrix composites. Materials Today: Proceedings 2021; 39, 160-164.
P Morampudi, VSNV Ramana, C Prasad, KS Vikas and Rahul. Physical, mechanical and corrosion properties of Al6061/ZrB₂ metal matrix nano composites via powder metallurgy process. Materials Today: Proceedings 2022; 59, 1708-1713.
N Ashrafi, MAA Hanim, M Sarraf, S Sulaiman and TS Hong. Microstructural, tribology and corrosion properties of optimized Fe₃O₄-SiC reinforced aluminum matrix hybrid nano filler composite fabricated through powder metallurgy method. Materials 2020; 13(18), 4090.
M Karthikraja, K Ramanathan, KT Loganathan and S Selvaraj. Corrosion behaviour of SiC and Al₂O₃ reinforced Al 7075 hybrid aluminium matrix composites by weight loss and electrochemical methods. Journal of Indian Chemical Society 2024; 100(5), 101002.
P Sureshkumar, T Jagadeesha, L Natrayan, M Ravichandran, D Veeman and SM Muthu. Electrochemical corrosion and tribological behaviour of AA6063/Si₃N₄/Cu(NO₃)₂ composite processed using single-pass ECAPA route with 120° die angle. Journal of Materials Research and Technology 2022; 16, 715-733.
M Gangadharappa, HN Reddappa, R Shobha, KVS Murthy, NC Reddy, ER Babu and R Suresh. Corrosion behavior of Al6061 hybrid composites reinforced with red mud particles and E-glass fiber. Materials Today: Proceedings 2021; 46, 6068-6074.
R Haridass, N Vishnu, A Abinesh, K Manoj and A Nandhakumar. Determination of corrosion behaviour of Al6061-SiC-RHA metal matrix composites. International Journal of Applied Mathematics 2018; 118(20), 907-915.
PV Krupakara and HR Ravikumar. Corrosion characterization of aluminium 6061 / red mud metal matrix composites in sea water. International Journal of Advanced Research in Chemical Science 2015; 2(6), 52-55.
OM Ikumapayi and ET Akinlabi. A comparative assessment of tensile strength and corrosion protection in friction stir processed AA7075-T651 matrix composites using fly ashes nanoparticles as reinforcement inhibitors in 3.5% NaCl. International Journal of Mechanical and Production Engineering Research and Development 2019; 9(3), 839-854.
J Suthar and K Patel. Corrosion behaviour of Mg, graphite-, B₄C and Ti-reinforced hybrid aluminium composites. Journal of the Institution of Engineers (India): Series C 2022; 103(4), 689-704.
M Kciuk, A Kurc and J Szewczenko. Structure and corrosion resistance of aluminium AlMg2.5; AlMg5Mn and AlZn5Mg1 alloys. Journal of Achievements in Materials and Manufacturing Engineering 2010; 41(1-2), 74-81.
IK Choi, SH Cho, SJ Kim, YS Jo and SH Kim. Improved corrosion resistance of 5XXX aluminum alloy by homogenization heat treatment. Coatings 2018; 8(1), 39.
Z He, Y Zeng, M Zhou, Y Min, X Shen and Q Xu. Superhydrophobic films with enhanced corrosion resistance and self-cleaning performance on an Al alloy. Langmuir 2021; 37(1), 524-541.
U Sajjad, A Abbas, A Sadeghianjahromi, N Abbas, JS Liaw and CC Wang. Enhancing corrosion resistance of Al 5050 alloy based on surface roughness and its fabrication methods; An experimental investigation. Journal of Materials Research and Technology 2021; 11, 1859-1867.
Z Shao, I Muto and Y Sugawara. Elucidation of the initiation of pitting corrosion and the growth of filiform corrosion of AZ91D in aqueous NaCl electrolyte. Electrochemical Soc. Meeting Abstracts 2020; MA2020-02(68), 3561.
B Dikici and C Tekmen. A comparative study: The combined effect of the cold working and age hardening processes on pitting behaviour of Al/SiC metal matrix composites under saline environment. Journal of Composite Materials 2016; 50, 471-480.
J Tanaka, T Tamura and T Narita. Microstructure of Zn and Zn-Al coating and its corrosion resistance in NaCl solution. Journal of the Surface Finishing Society of Japan 2000; 51, 1224-1228.
B Dikici, M Gavgali and C Tekmen. Corrosion behavior of an artificially aged (T6) Al–Si–Mg-based metal matrix composite. Journal of Composite Materials 2006; 40, 1259-1269.
H Yang, Y Wang, X Wang, P Pan and D Jia. The effects of corrosive media on fatigue performance of structural aluminum alloys. Metals 2016; 6, 160.
D Ramesh, R Swamy and T Chandrashekar. Corrosion behaviour of Al6061-frit particulate metal matrix composites in sodium chloride solution. Journal of Minerals and Materials Characterization Engineering 2013; 1, 15-19.
S Kandasamy, P Rathinasamy, N Nagarajan, K Arumugam, R Rathanasamy and G Kaliyannan. Corrosion behavioral studies on AA7075 surface hybrid composites tailored through friction stir processing. Anti-Corrosion Methods and Materials 2020; 67, 345-355.
M Slemnik. Comparative evaluation of corrosion resistance of AISI 316L and Ti6Al4V dental materials under simulated inflammatory conditions. Materials 2025; 18(10), 2243.
S Rajkumar, M Loganathan and R Venkatesh. Optimization of NaCl based spray corrosion test process parameters of heat treated hybrid metal matrix composites. Bulletin of the Chemical Society of Ethiopia 2022; 36(4), 903-914.
B Stalin, M Ravichandran, S Arivukkarasan and V Mohanavel. Weight loss corrosion studies of Aluminium-LM4 reinforced with Alumina Silicate (Al₂O₃SiO₂) particulates composites in sodium chloride (NaCl) solution. International Journal of Mechanical and Production Engineering Research and Development 2018; 8, 329-336.
A Chandrashekar and B Reddappa. Mechanical, structural and corrosion behaviour of AlMg4.5/nano Al₂O₃ metal matrix composites. Materials Today: Proceedings 2017; 5, 2811-2817.
CD Naiju and J Thangaraj. Investigation of wear and corrosion behavior of aluminum metal matrix composites for automotive applications. SAE Technical Paper Series 2020. https://doi.org/10.4271/2020-28-0461
Z Shamsu, NK Othman, MS Md Jamil, H Yazid and MS Alias. Effect of nano composite boron carbide on the mechanical and corrosion behaviour of aluminium matrix composite. Jurnal Kejuruteraan 2024; 36(6), 2603-2614.
CI Pruncu, A Vladescu, NRJ Hynes and R Sankaranarayanan. Surface investigation of Physella acuta snail shell particle reinforced aluminium matrix composites. Coatings 2022; 12(6), 794.
A Szewczyk-Nykiel. The influence of carbide reinforcement on the properties of sintered aluminium alloy matrix composites. Technical Transactions 2023; 120(1), e2023005.
RT Loto and P Babalola. Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites. Cogent Engineering 2018; 5, 1473002.
AC Igwe and NH Ononiwu. A study on the corrosion behaviour of aluminium reinforced with rice husk in NaCl and H₂SO₄. International Journal of Advanced Manufacturing and Technology 2025; 137, 3013-3023.
J Idris, Z Awaludin and GD Eyu. Study on corrosion resistance of recycled aluminium matrix composite, Available at:https://www.researchgate.net/publication/236118642_Study_on_Corrosion_Resistance_of_Recycled_Aluminium_Matrix_Composite, accessed June 2026.
Z Samsu, NK Othman, MSM Jamil, H Yazid and MS Alias. Corrosion behaviour of aluminium matrix composite reinforced with boron carbide in 3.5% NaCl. International Journal of Nanoelectronics Materials 2023; 16, 451-461.
S Yahya, AA Rahim, AM Shah and R Adnan. Inhibitive behaviour of corrosion of aluminium alloy in NaCl by mangrove tannin. Sains Malaysiana 2011; 40, 953-957.
A Chandrashekar and HN Reddappa. Mechanical, structural and corrosion behaviour of AlMg4.5/Nano Al₂O₃ metal matrix composites. Materials Today: Proceedings 2018; 5, 2811-2817.
NVR Maganti and RR Potturi. Investigation on mechanical and machinability properties of aluminium metal matrix composite reinforced with titanium oxide (TiO₂) and graphite (Gr) particles. Trends in Sciences 2023; 20(11), 5682.
MS Kumar, N Sathisha and TR Rajesh. Corrosion study on chill casting effect on aluminium A356 reinforced with Hematite metal matrix composites. Materials Today: Proceedings 2022; 56, 1226-1233.
CM Rao, KG D Prasad, KV Subbaiah and A Ravindra. Analysis of corrosion polarization behaviour in GNP/TiB₂ reinforced hybrid Al–Mg-Si-MMNCs for marine environments. Journal of the Institution of Engineers (India): Series D 2024; 106, 1557-1566.
SD Kumar, M Ravichandran, A Jeevika, B Stalin, C Kailasanathan and A Karthick. Effect of ZrB₂ on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route. Ceramics International 2021; 47, 12951-12962.
J Gayathri and R Elansezhian. Synthesis of novel aluminium metal matrix composite using industrial metallic waste: Impact on wear and corrosion behaviour. AIP Conference Proceedings 2019; 2162, 020026.
R Verma, PV Kumar, KA Meghashree and P Puneeth. Study of corrosion rate on graphene and S-glass reinforced Al-6061 metal matrix composites. International Journal of Engineering Sciences & Research Technology 2020; 7, 433-441.
G Sundar and NRJ Hynes. Reinforcement in aluminium metal matrix composites. AIP Conference Proceedings 2019; 2142(1), 070006.
EK Manoharan and S Malairajan. Studies on the corrosion resistance of Al7075/SiC metal matrix composites in an alkaline environment. International Research Journal of Pharmaceutical and Applied Sciences 2020; 10, 43-47.
VV Popov, A Pismenny, N Larianovsky, A Lapteva and D Safranchik. Corrosion resistance of Al–CNT metal matrix composites. Materials 2021; 14, 3530.
NM Dawood. Erosion-corrosion behavior of Al-20%Ni-Al₂O₃ metal matrix composites by stir casting. Materials Science Forum 2020; 1002, 161-174.
A Albiter, A Contreras, M Salazar and JG Gonzalez-Rodriguez. Corrosion behaviour of aluminium metal matrix composites reinforced with TiC processed by pressureless melt infiltration. Journal of Applied Electrochemistry 2006; 36, 303-308.
P Ikubanni, M Oki and A Adeleke. A review of ceramic/bio-based hybrid reinforced aluminium matrix composites. Cogent Engineering 2020; 7(1), 1727167.
B Singh, I Kumar, KK Saxena, KA Mohammed, MI Khan, SB Moussa and SS Abdullaev. A future prospects and current scenario of aluminium metal matrix composites characteristics. Alexandria Engineering Journal 2023; 76, 1-17.
J Ge, S Pillay and H Ning. Post-process treatments for additive-manufactured metallic structures: A comprehensive review. Journal of Materials Engineering and Performance 2023; 32, 7073-7122.
S Roseline and V Paramasivam. Corrosion behaviour of heat-treated Aluminium Metal Matrix composites reinforced with Fused Zirconia Alumina 40. Journal of Alloys and Compound 2019; 799, 205-215.
MAF Romzi, J Alias and MIM Ramli. Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique. IOP Conference Series: Materials Science and Engineering 2021; 1068, 012004.
AA Adediran, AB Ogunkola, FO Edoziuno, OS Adesina, MS Kumar and OC Okechukwu. Squeeze casting process: Trends and opportunities. In: TR Vijayaram (Ed.). Casting processes. IntechOpen, London, 2022.
L Tharanikumar, B Mohan and G Anbuchezhiyan. Synthesization and characterization of silicon carbide and boron nitride-reinforced Al–Zn–Mg alloy hybrid nanocomposites using squeeze casting method. International Journal of Metalcasting 2024; 18, 997-1011.
F Aydin, Y Sun and ME Turan. Influence of TiC content on mechanical, wear and corrosion properties of hot-pressed AZ91/TiC composites. Journal of Composite Materials 2020; 54(2), 141-152.
PP Ikubanni, AO Mosadomi, AA Adeleke, OO Agboola, SA Ajayi, OS Adesina and OT Faloye. Tensile and fracture behaviour of aluminium MMCs with ceramic particles - A review. Canadian Metallurgical Quarterly 2025; 65(2), 1226-1255.
ET Akinlabi, RS Fono-Tamo and J Tien-chien. Microstructural and dry sliding friction studies of aluminum matrix composites reinforced PKS ash developed via friction stir processing. In: C Chesonis (Ed.). The minerals, metals & materials series (light metal). Springer Nature, Singapore, 2019, p. 401-406.
K Zass, S Mabuwa and V Msomi. A review on reinforced particles used on the production of FSP composites. Materials Today: Proceedings 2022; 56, 2392-2397.
SS Das, AR Raja, H Nautiyal, RKS Gautam, P Jha, J Sharma and S Singh. A review on aluminum matrix composites synthesized by FSP. Macromolecular Symposia 2023; 407, 2200119.
A Maqbool, NF Lone, T Ahmad, NZ Khan and AN Siddiquee. Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy-based metal matrix composite. Journal of Manufacturing Processes 2023; 89, 170-181.
MSK Nartu and P Agrawal. Additive manufacturing of metal matrix composites. Materials & Design 2025; 252, 113609.
M Dadkhah, MH Mosallanejad, L Iuliano and A Saboori. A comprehensive overview on the latest progress in the additive manufacturing of metal matrix composites: Potential, challenges, and feasible solutions. Acta Metallurgica Sinica (English Letters) 2021; 34, 1173-1200.
HM Khan, G Özer, MS Yilmaz and E Koc. Corrosion of additively manufactured metallic components: A review. Arabian Journal for Science and Engineering 2022; 47, 5465-5490.
G Özer and MS Yilmaz. Corrosion behaviour of additive manufactured metals. In: T Pei, A Bernard, D Gu, C Klahn, M Monzón, M Petersen and T Sun (Eds.). Springer handbook of additive manufacturing. 1st ed. Springer Nature, Switzerland, 2023, p. 751-776.
JM Morel, J Creus, L Gaillet, V Chatel and JY Astic. Evaluation of the durability of weathering steel - Effects of environmental changes on corrosion behavior of low alloyed steels. ce/papers - Proceedings in Civil Engineering 2021; 4(2-4), 1644-1649.
Z Fang, J Cao and Y Guan. Corrosion control technologies for aluminum alloy vessel. Springer, Singapore, 2020.
SK Padamata, K Singh, GM Haarberg and G Saevarsdottir. Wettable TiB₂ cathode for aluminum electrolysis: A review. Journal of Sustainable Metallurgy 2022; 8, 613-624.
DA Shifler. Localized corrosion. In: DA Shifler (Ed.). LaQue’s handbook of marine corrosion. Elsevier, Amsterdam, Netherlands, 2022, p. 63-121.
Z Hu, L Hua, W Liu, X Wang and L Wu. Fatigue life assessment of marine structures accounting for multiple pit corrosion interactions: Coupling effects and crack initiation detection. Ocean Engineering 2025; 333, 121581.
AK Lahiri. Material selection and performance in oil and gas industry. In: AK Lahiri (Ed.). Applied metallurgy and corrosion control: A handbook for the petrochemical industry. Springer, Singapore, 2017, p. 269-347.
PK Krishnan. Fabrication and application of aluminum metal matrix composites. In: R Thanigaivelan, N Rajan and TG Arul (Eds.). Advanced manufacturing techniques for engineering and engineered materials. IGI Global Scientific Publishing, Pennsylvania, 2022, p. 133-151.
O Muribwathoho, V Msomi and S Mabuwa. Metal matrix composite developed with marine grades: A review. Materials Science Forum 2023; 1085, 77-89.
M Harilal, RP George, SK Albert and J Philip. A new ternary composite steel rebar coating for enhanced corrosion resistance in chloride environment. Construction and Building Materials 2022; 320, 126307.
KK Maniam and S Paul. Corrosion performance of electrodeposited zinc and zinc-alloy coatings in marine environment. Corrosion and Materials Degradation 2021; 2(2), 163-189.
J Wang, M Wu, X Miao, D Bian, Y Wang and Y Zhao. Chemically bonded phosphate ceramic coatings with self-healing capability for corrosion resistance. Surface and Coatings Technology 2023; 473, 129987.
HM Ahmed, HA Ahmed, M Hefni and EB Moustafa. Effect of grain refinement on the dynamic, mechanical properties, and corrosion behaviour of Al–Mg alloy. Metals 2021; 11(11), 1825.
N Merah, MA Azeem, HM Abubaker, F Al-Badour, J Albinmousa and AA Sorour. Friction stir processing influence on microstructure, mechanical, and corrosion behavior of steels: A review. Materials 2021; 14(17), 5023.
J Yue and Y Cao. Corrosion prevention by applied coatings on aluminum alloys in corrosive environments. International Journal of Electrochemical Science 2015; 10(7), 5222-5237.
PP Ikubanni, M Oki, AA Adeleke, TA Orhadahwe, AS Adeiza, JA Okolie, PO Omoniyi and TC Jen. Application of conversion coatings on aluminium matrix composites for corrosion protection. Portugaliae Electrochimica Acta 2025; 43(3), 165-176.
M Ebadi, M Alishavandi and MH Paydar. Anodizing behavior and electrochemical evaluation of accumulative roll bonded Al and Al–SiC composite. Surface and Coatings Technology 2021; 408, 126776.
S Carter, R Clough, A Fisher, B Gibson, B Russell and J Waack. Atomic spectrometry update: Review of advances in the analysis of metals, chemicals and materials. Journal of Analytical Atomic Spectrometry 2019; 34(11), 2159-2216.
RB Figueira. Hybrid sol–gel coatings for corrosion mitigation: A critical review. Polymers 2020; 12(3), 689.
N Martin and A Mohamed. Sacrificial anodes and environmental effects. In: K Muduli, SK Rout, S Sarangi, SMN Islam and A Mohamed (Eds.). Evolutionary manufacturing, design and operational practices for resource and environmental sustainability. Elsevier, Amsterdam, Netherlands, 2024, p. 81-106.
A Mohamed and N Martin. Impressed current cathodic protection and environmental impacts. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Manila, Philippines. 2023.
S Sanyal, S Park, R Chelliah, SJ Yeon, K Barathikannan, S Vijayalakshmi and DH Oh. Emerging trends in smart self-healing coatings: A focus on micro/nanocontainer technologies for enhanced corrosion protection. Coatings 2024; 14(3), 324.
A Dai and Y He. Investigation of water-based drilling fluid properties modified by nano ZnO-polyacrylamide composite. Matéria 2025; 30, e20240835.
AM Alkalbani and GT Chala. A comprehensive review of nanotechnology applications in oil and gas well drilling operations. Energies 2024; 17(4), 798.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Walailak University
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
