Proximity Porosity and Crystallinity Analysis as Clay/Nickel Slag Characteristics for Material Stabilization Application

Authors

  • Abdul Gaus Departement of Civil Engineering, University of Khairun, Ternate, Indonesia
  • Ichsan Rauf Departement of Civil Engineering, University of Khairun, Ternate, Indonesia
  • Fahmi Siregar Departement of Civil Engineering, University of Khairun, Ternate, Indonesia
  • Heryanto Heryanto Departement of Physics, University of Hasanuddin, Makassar, Indonesia

DOI:

https://doi.org/10.48048/tis.2024.7970

Keywords:

Nickel slag, soft soil stabilization, XRD analysis

Abstract

               Slag nikel is a by-product of nickel ore smelting through the pyrometallurgical process, which contains silica (> 50 %). This suggests that nickel slag, possessing pozzolanic properties, which potentially to be used as a binding material in construction projects dealing with low soil bearing capacity, such as soil improvement for road foundation. Pozzolanic reactions are greatly influenced by the chemical bonds formed between the binding material and the soil, causing mechanical characteristic changes in the soil. This study aims to examine the effect of adding nickel slag to soft soil based on changes in its physical, mechanical and chemical properties. Physical and mechanical property tests were conducted according to ASTM standards, while the changes in chemical structure in the soil were analyzed based on X-Ray Diffraction (XRD) test results. In this study, nickel slag percentages of 3, 6, 9 and 12 % were used based on the weight ratio of clay soil, at optimum water content (wopt). Furthermore, the test specimens were cured for 14, 28 and 56 days to observe the effect of time on the increase of crystal phases in each variation. The results showed that the presence of nickel slag in the soil can affect its physical and mechanical properties. The nickel slag content in the soil of 3, 6, 9 and 12 % reduces the plasticity index by 16.69, 12.02, 8.86 and 6.38 %, respectively. Meanwhile, the density values increased by 10.97, 11.27, 11.68 and 12.01 kN/m3, respectively. The changes in physical and mechanical properties can be explained by the XRD analysis results, showing changes in the spectrum curve and peak intensity of X-Ray Diffraction in the soil with the addition of nickel slag. This explanation clarifies the transformation of the soil’s atomic structure from an amorphous state to a crystalline form, which is stabilized by nickel slag.

HIGHLIGHTS

  • The silica-rich nature of nickel slag offers a feasible alternative for chemical soil stabilisation
  • The stabilization of soft soil with nickel slag results in a decrease in the plasticity index and an increase in density
  • Immersion duration shows a changing response for the crystallinity index and porosity of the material

GRAPHICAL ABSTRACT

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

Kimpraswil. Panduan geoteknik: Timbunan Jalan pada Tanah Lunak (in Indonesian). Pusat Litbang Prasarana Transportasi, Bandung, Indonesia, 2002.

J Ahmad, M Rosli, AA Rahman, S Senin and M Noor. Volume change behaviour of clay by incorporating shear strength: A review. In: Proceedings of the 2nd International Conference on the Future of ASEAN, Singapore. 2018.

P Lindh and P Lemenkova. Evaluation of different binder combinations of cement, slag and CKD for S/S treatment of TBT contaminated sediments. Acta Mech. Automatica 2021; 15, 236-48.

T Hills, N Florin and P Fennell. Decarbonising the cement sector: A bottom-up model for optimising carbon capture application in the UK. J. Cleaner Prod. 2016; 139, 1351-61.

R Zhang, M Long and J Zheng. Comparison of environmental impacts of two alternative stabilization techniques on expansive soil slopes. Adv. Civ. Eng. 2019; 2019, 9454929.

R Renjith, D Robert, C Gunasekara, S Setunge and B O’Donnell. Optimization of enzyme-based soil stabilization. J. Mater. Civ. Eng. 2020; 32, 2020.

FA Booklet-Nikel. Peluang investasi nikel di Indonesia (in Indonesian). Kementerian ESDM, Jakarta, Indonesia, 2021.

I Rauf, A Gaus, MA Sultan and H Heryanto. Analysis and characterization of nickel industry by-products as pozzolan materials. Civ. Eng. Architect. 2023; 12, 401-8.

S Wang, X He, G Cai, L Lang, H Ma, S Gong and Z Niu. Investigation on water transformation and pore structure of cement-stabilized dredged sediment based on NMR technology. Materials 2022; 15, 3178.

P Lindh and P Lemenkova. Geochemical tests to study the effects of cement ratio on potassium and TBT leaching and the pH of the marine sediments from the Kattegat Strait, Port of Gothenburg, Sweden. Baltica 2022; 35, 47-59.

M Fasihnikoutalab, A Asadi, C Unluer, B Huat, R Ball and S Pourakbar. Utilization of alkali-activated olivine in soil stabilization and the effect of carbonation on unconfined compressive strength and microstructure. J. Mater. Civ. Eng. 2017; 29, 06017002.

J Díaz-López, M Cabrera, F Agrela and J Rosales. Geotechnical and engineering properties of expansive clayey soil stabilized with biomass ash and nanomaterials for its application in structural road layers. Geomech. Energ. Environ. 2023; 36, 100496.

PSR Raja and T Thyagaraj. Effect of compaction time delay on compaction and strength behavior of lime-treated expansive soil contacted with sulfate. Innovat. Infrastruct. Solut. 2020; 5, 14.

B Bowers, J Daniels, S Lei and NJ DeBlasis. Additives for soil-cement stabilization. In: B Huang, BF Bowers, GX Mei, SH Luo and Z Zhang (Eds.). Pavement and geotechnical engineering for transportation. American Society of Civil Engineers, Nanchang, China, 2011.

I Rauf, L Samang, T Harianto and A Arsyad. Correlation of UCS and CBR on lightweight geocomposite of soil-EPS stabilized by waste of buton asphalt. Mater. Sci. Forum 2020; 998, 311-6.

A Rajabi and S Ardakani. Effects of natural-zeolite additive on mechanical and physicochemical properties of clayey soils. J. Mater. Civ. Eng. 2020; 32, 04020306.

VH Dodson. Pozzolans and the pozzolanic reaction. In: VH Dodson (Ed.). Concrete admixtures. Springer, Boston, United States, 1990, p. 120-59.

L Jiang, D Niu, L Yuan and Q Fei. Durability of concrete under sulfate attack exposed to freeze-thaw cycles. Cold Regions Sci. Tech. 2015; 112, 112-7.

L McKeen. Introduction to the physical, mechanical, and thermal properties of plastics and elastomers. In: L McKeen (Ed.). The effect of sterilization on plastics and elastomers. William Andrew Publishing, New York, 2012, p. 57-84.

Wardoyo, Sarwondo, F Destiasari, Wahyudin, Wiyono, G Hasibuan and WP Sollu. Atlas: Sebaran tanah lunak Indonesia (in Indonesian). Badan Geologi, Bandung, Indonesia, 2019.

M Janz and SE Johansson. The function of different binding agents in deep stabilization. Swedish Deep Stabilization Research Centre, Linköping, Sweden, 2002.

O Carașca. Soil improvement by mixing: Techniques and performances. Energ. Procedia 2016; 85, 85-92.

H Stanjek and W Hausler. Basic of x-ray diffraction. Hyperfine Interact. 2004; 154, 107-19.

H Heryanto and D Tahir. Enhancing photocatalyst performance of magnetic surfaces covered by carbon clouds for textile dye degradation. Arabian J. Sci. Eng. 2023, https://doi.org/10.1007/s13369-023-08532-y

H Heryanto, S Siswanto, R Rahmat, A Suleiman, D Bradley and D Tahir. Nickel slag/laterite soil and nickel slag/iron sand nanocomposites: Structural, optical, and electromagnetic absorption properties. ACS Omega 2023; 8, 18591-602.

H Heryanto and D Tahir. Composite fayalite with 5 % laterite soil and iron sand: Structural properties and band gap calculation based on theoretical kubelka-munk, taylor expansion, and self-consistent field method. JOM 2023; 75, 5264-72.

HC Hardiyatmo. Mekanika tanah 1. 5th ed. Gadjah Mada Press, Yogyakarta, Indonesia, 2010.

RC Jones, CJ Babcock and WB Knowlton. Estimation of the total amorphous content of Hawaiian clays by the rietveld method. Clay Sci. Soc. Am. J. 2000; 60, 1100-8.

V Ponomar, J Yliniemi, E Adesanya, K Ohenoja and M Illikainen. An overview of the utilisation of Fe-rich residues in alkali-activated binders: Mechanical properties and state of iron. J. Cleaner Prod. 2022; 330, 129900.

H Heryanto and D Tahir. Composite fayalite with 5% laterite soil and iron sand: structural properties and band gap calculation based on theoretical Kubelka-Munk, Taylor expansion, and self-consistent field method. J. Miner. Met. Mater. Soc. 2023; 75, 5264-72.

International tables for crystallography, Available at: https://doi.org/10.1107/97809553 602060000001, accessed November 2023.

ATM Marsh, T Yang, S Adu-Amankwah and SA Bernal. Utilization of metallurgical wastes as raw materials for manufacturing alkali-activated cements. In: JD Brito, C Thomas, C Medina and F Agrela (Eds.). Waste and byproducts in cement-based materials. Woodhead Publishing, Sawston, 2021, p. 335-83.

G Wang, Y Cui, X Li, R Shi, J Yang, S Yang, J Zhao and J Nan. Structure and adaptability of FexO-SiO2-MgO-15 wt% CaO-0.026 wt% NiO slag with the Fe/SiO2 mass ratio of 1.2 in flash matte smelting. Ceram. Int. 2023; 49, 2531-9.

S Holding and J Davies. Chromatography: Liquid / Mechanisms: Size exclusion chromatography. In: F Perras and AL Paterson (Eds.). Chemistry, molecular sciences and chemical engineering. Elsevier, Amsterdam, Netherlands, 2000, p. 718-26.

A Kassa, S Raihan, K Hayano, BN Phan, H Yamauchi and Y Mochizuki. Novel method for evaluating water absorption and retention of waste-based stabilizers using suction filtration to predict treatment effects on soft clay soils. Soils Found. 2023; 63, 101334.

W Zhang, KE Thompson, AH Reed and L Beenken. Relationship between packing structure and porosity in fixed beds of equilateral cylindrical particles. Chem. Eng. Sci. 2006; 61, 8060-74.

Downloads

Published

2024-06-10

How to Cite

Gaus, A. ., Rauf, I. ., Siregar, F. ., & Heryanto, H. . (2024). Proximity Porosity and Crystallinity Analysis as Clay/Nickel Slag Characteristics for Material Stabilization Application. Trends in Sciences, 21(8), 7970. https://doi.org/10.48048/tis.2024.7970